Loading ...
Loading ...
Loading ...
REVERSE HARDWARE ON CABINET
❑
TWSFER-MHIHGEBWKET
~THE
LEFT.
a. Remove the base grille. Grasp it at the bottom and
pull it straight out.
1
e,
PLASTIC
\
r
/
WASHER
4d\
‘1=.
@\
%?@
b
BOTTOM RIGHT
b. Using a
Torxdriver,
remove the hinge bracket
(and shim glued to it) and plastic washer from the
bottom right side of the cabinet.
c. Reinstall the hinge bracket (and shim glued to it)
and plastic washer to the bottom left side of the
cabinet.
16
❑
TRANSFER
CEHTERHIHGEBWKET
TO THE LEFT.
DO NOT REMOVE
THIS SCREW
4+
@
\
\
\
=+5
(2,
>“*”’
.’f@iQ
*
\
~,
CENTER RIGHT
‘%
-
a. Remove the hinge bracket (and shim glued to it)
from the center right side of the cabinet by removing
the three outermost Torx screws.
b. Remove the three outermost Torx screws from the
center left side of the cabinet and screw them into
the holes at the right side uncovered in Step (a)
above.
DO NOT REMOVE -
CENTER LEFT
THIS SCREW
@
/
/
@
/
e
4!5==
,Q’
,@
w
q
.“’<
w
~//
Place the center hinge bracket over the holes at the
center left side of the cabinet, insert the screws you
removed from the opposite side, and tighten them.
❑
TRANSFER TOP
HINGE
TO THE LEFT.
Interchange hinge and screws at top right with
screws at top left of cabinet. Do not tighten screws
on hinge side at this time.
❑
TRANSFER DOOR STOPS.
~~~’!f~~~~;’;:’ght
~=i
b.
Move any screws from the left end to the right end.
Loading ...
Loading ...
Loading ...