Loading ...
Loading ...
Loading ...
KEYPAD FEATURE INSTRUCTIONS
CONVECT Convection
baking and
roasting
1. Press CONVECT.
2. Press TEMP/TIME "up" or "down" arrow pads to set a temperature other than 350°F (175°C) in
5°F (5°C) increments between 170°F and 500°F (75°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START or wait 5 seconds for the change to
take effect.
5. Press CANCEL when finished.
NOTE: The oven wi!! automatically turn off after 60 minutes,
START TIME Delayed start The Start Time keypad is used to enter the starting time for an oven function with a delayed start.
Start Time should not be used for foods such as breads and cakes because they may not bake
properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
COOK TIME Timed Cooking Timed Cooking allows the oven to be set to turn on at a Certain time of day, c0ok for a set length of
time, and/or shut off automatically.
set a Timed Cook ora Delayed Timed Cook, see !!Cook Time" section.
AQUALIFT Clean cycle
SELF CLEAN
See the "Clean Cycle" section.
START oven control 1. Check that the oVenis off,
(hold 3 sec lockout
2 Press and hold the START (hold 3 secto 10ck)keypad for 3 seconds
to ock) ' :
3, Atonew sound, and Loc w bedsPayed.
4, Repeat to unlock. Only the CLOCK, OVEN LIGHT and TIMER keypads will function with the
controls !ocked, The cooktop functions are not affected by the oven control lockout,
COOKTOP USE
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
OFF
Lo Hi__
_._. Med
The control knobs can be set to anywhere between HIGH and
LOW. Push in and turn to setting.
Ceramic Glass
The surface cooking area will glow red when an element is on.
Some parts of the surface cooking area may not glow red when an
element is on. This is normal operation. The burner will cycle on
and off to maintain the selected heat level. It will also randomly
cycle off and back on again even while in High to keep the cooktop
from extreme temperatures.
It is normal for the surface of light colored ceramic glass to appear
to change color when surface cooking areas are hot. As the glass
cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting,
abrasions and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended for
stubborn soils. Do not use abrasive cleaners, cleaning pads or
harsh chemicals for cleaning. The Cooktop Care Kit Part Number
31605 contains all of the items needed to clean and condition your
ceramic glass cooktop. Refer to the "Range Care" section for
additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface
and to make soils easier to remove, clean the cooktop after each
use to remove all soils.
• Avoid storing jars or cans above the cooktop. Dropping a heavy
or hard object onto the cooktop could crack the cooktop.
To avoid damage to the cooktop, do not leave a hot lid on the
cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop, and the ceramic glass could
break when the lid is removed.
I REMEMBER: When range is in use, the entire cooktop area I
I
may become hot.
I
Loading ...
Loading ...
Loading ...