Loading ...
Loading ...
Loading ...
5
WARNING: All wiring must be installed by a certified electrician in
accordance with electrical safety standards.
The ceiling heater must be grounded in accordance with all national
and local building codes.
WARNING: To reduce the risk of fire, do not store or use gasoline
or other flammable vapors and liquids in the vicinity of the heater.
All wiring procedures and connections should be in
accordance with local codes and ordinances.
NOTE: Compatible with a 240V Line Voltage Double Pole Wall
Thermostat. Must be installed by a certified/licensed electrician.
Before installation:
Disconnect the main supply connection.
Supply cables should be 8-2 AWG (8.4 mm
2
) copper wires.
The heater must be connected to an individual branch circuit
protected by a 35 amp circuit breaker.
Supply cables must be equipped with a dual pole circuit breaker
rating of at least 240V 35 A/pole as the main cut-off switch of power
to the heater.
Tools/ Materials Needed (Not Included):
·Regular Screwdriver Set
·Spanner
·Impact Drill with 12mm Drill Bit
Recommended Accessories:
·DR-001: Thermostat
Unpacking Contents:
·Heater
·Owner's Manual
·Warranty Card
·Heater Handle
·Mounting Bracket
·Tilt Adjustable Knob x 2
·Screw Kit
INSTALLATIONINSTRUCTIONS
Loading ...
Loading ...
Loading ...