Loading ...
Loading ...
Loading ...
Not enough or no rinse aid is used. Check the dispenser and add rinse aid, and check
the rinse aid setting.
Glasses and cups with concave bottoms hold water, causing water to spill when you
unload. After a cycle finishes, unload the lower rack first and then the upper, this will
prevent water spilling from the upper rack onto the dishes in the lower rack.
Does not dry dishes The water temperature is low. Connect the water supply line to a hot water supply and
well. use rinse aid with the Sanitize option.
Too many dishes have been loaded. Proper loading of items can affect drying.
Load dishes as recommended.
When drying is complete, try touching inside the dishwasher and the loaded dishes.
If any of these does not feel warm. call for service.
Make sure that the dishwasher is level.
See the user manual and reload dishes as instructed.
Sound is generated when the dispenser cover is open and the drain pump is operating
during an early stage. This is normal.
Foreign material (screws, pieces of plastic, etc.) is in the pump chamber. Contact a
qualified service technician to remove foreign material from the pump chamber.
Utensils are not secure, or small objects have dropped into the basket. Make sure
everything is secured in the dishwasher.
The motor may hum if the dishwasher has not been used regularly. If you do not use it
often, remember to set it to fill and pump out every week. which will help keep the seal
moist.
Caused by coffee and tea soils.
Use a cycle with a higher temperature.
There is yeflow Remove the soils using a spot cleaner.
or brown film on
the inside of the Use a solution of 1/2 cup of bleach and 3 cups warm water to remove the stains by
dishwasher, hand.
_G o avoid burns, after a cycle, wait for 20 minutes to let the heating elements cool down
before cleaning the interior.
,, The water supplied is soft, and too much detergent is being used. Underload the
Fi!m on glasses, dishwasher and use a rinse aid to minimize this.
,, Aluminum dishes have been included in the load. Remove the marks on the dishes using
a non-abrasive cleaner.
Does not have any - The power cord may not be connected. Connect the power cord.
indicators lit.
Does not have a " See the maintenance section of this user manual and clean the spray arms.
smoothly rotating ,, Dishes are blocking the nozzle. After placing the dishes into the racks, rotate the nozzles
nozzle, by hand to check whether any of the dishes interfere with them.
Hard water is being supplied.
White coating on " Make sure the salt fill indicator and softener setting of your water softener is correct
CUtlery or Crockery. according to the water hardness of your area.
,, Make sure the salt reservoir cap is correctly fitted.
An operation or " Cold water is being supplied. Make sure the water supply line is connected to a hot water
cycle takes too long. supply. (Additional time is required to heat cold water.)
English o 23
Loading ...
Loading ...
Loading ...