Loading ...
Loading ...
Loading ...
MA,NTENANOESCHEDULE
AS YOU COMPLETE O9`_ 4 9-4 _ 9--.t 9--.t 9--.t 9--.t O'"
REGULAR SERVICE J__r/_ZERVICE DATES
Check Brake Operation
Check Tire Pressure
Check Operator Presence and
T Interlock Systems tf
R Check for Loose Fasteners V' V'5 V p
Sharpen/Replace Mower Blades _1_ 3
T Lubrication Chart I_ I_
0 Check Battery Level _4
R Clean Battery and Terminals t_ If
Check Transaxle Cooling
Check V-Belts
Check Engine Oil Level _
Change Engine Oil (with oil filter) _1,2 I_
E Change Engine Oil (without oil filter) _1_1, 2
N Clean Air Filter 1_2
G Clean Air Screen 1_2
N_ Inspect Muffler/Spark
Arrester
E Replace Oil Filter (If equipped) 1_1,2
Clean Engine Cooling Fins I_ 2
Replace Spark Plug _
Replace Air Filter Paper Cartridge _2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-Ibs, maximum.
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your trac-
tor.
All adjustments in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
(_Front Wheel
Bearing
Zerk
@Engine ,.-
(_ General Purpose Grease
@ REFER TO Maintenance "ENGINE" SECTION
(_Front Wheel
, L_ Bearing Zerk
i
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18
Loading ...
Loading ...
Loading ...