@
)f
d
Use and Care & Installation Guide
Refrigerator
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . .
3
Operating Instructions, Tips
Appliance Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Base
Grflle
. . . . . . . . . . . . . .
.
..........................9
Condenser . . . . . . . . . . . . . .............................9
Defrosting . . . . . . . . . . . . . . ............................2
Energy-Saving Tips . . . . ..............................2
Food Storage Suggestion
s..........................8
Icemaker . . . . . . . . . . . . . .
.
............................7
lcemaker Accessory Kit.. .............................7
lce
Trays
..._.~.....~._.
.............................5
Shelves
.......ti......~...
.................... 4,5
Storage Drawers . . . . . . ..............................6
Drawerand Cover Removal. . . . .
.10,16
Temperature Control . . . . . . . . . . . . . . . . .
.4
Water Filter Accessory . .
............................7
Water Supply Kit . . . . . . . .....................7, 11
CareandCleaning
Cleaning, Outside andlnsi
de......................9
Light Bulb Replacement . ........................10
GE Appliances
Problem Solver . . . . . . . .
.
.19,20
More
questions?...call
GEAnswerCenter@
8iM626.2000
Preparation
Clearances H.v_. . . . . . . .
.
. . . . . . . . . . . .
.
11
Door Swing Option . . . . ... . . . . . . ..13–16
Location~....ti......ti..~
. . . . . . . . . . . .
.
11
Moving.._...~......~...
. . . . . . . . . . . .
.
11
Rollers and Leveling Legs . . . . . . . . . . . .
.
11
Vacation..u.........o...
. . . . . . . . . . . .
.
11
WaterSupplyto Icemaker . . . . . . . . . . .
.11
Installation
lnstaflation
.......--~...
. . . . . . . . .
.
12–18
Adapter Plug . . . . . . . . . . . . . ...................12
Electrical Requirements.. . . . . . . . . . . .
.
12
Extension Cord . . . . . . . . ........................12
Grounding . . . . . . . . . . . . . . . . . . . . . . . .
.12
Water Line installation . ................. 17, 18
COnsUrnerSet’viCeS........
..........23
Model and Serial Numbe
rs.........................2
Important Phone Numbers . . . . . . . . . . .
.
23
Repair Service . . . . . . . . ............................23
Warranty . . . . . . . . . . . . . . . . ....... Back
Covef’
Jbp-MountNo-Frost
14&
76Models
HELP US HELP
YOU...
Read this book carefully.
It is intended to help you operate and maintain your
new refrigerator properly.
Keep
it handy
for
answers to your questions.
If
yoLl
don’t understand something or need more help,
write (include
your
phone number):
Consumer Affairs
GE
Appliances
Appliance
%-k
Louisville, KY 40225
Write down the model & serial numbers.
You’ll see them on a label at the left side of the fresh
food compartment.
These numbers are also on the Consumer Product
Ownership Registration Card that came with your
refrigerator.
Before sending in the registration card, please write
these numbers here:
Model Number
If you received a damaged refrigerator...
Serial Number
Immediately contact the dealer (or builder) that sold
Use these model and serial numbers in any correspondence
jou the refrigerator.
or service calls concerning your refrigerator.
Save time and money.
Before you request service...
Check the
p~”oblem
Solver in the back of the book. It lists
minor operating problems that you can correct yourself.
ENERGY-SAVING TIPS
“
Location of your refrigerator is important. Avoid
Q
Keep foods covered to reduce moisture buildup
locating it next to your range,
a
heating vent or
inside the refrigerator.
where
the sun will shine directly on it.
● Close the doors
as
soon
as
possible, particularly in
hot. humid weather.
No Defrosting
●
Be
sure the doors are closed tightly. Before leaving
the house or retiring for the night, check to be sure
It is not nesessary to defrost the freezer or fresh food
the doors haven’t been left open accidentally.
compartments. Your refrigerator equipped to defrost
itself automatically. However, some frost on packages
is normal.
IF YOU NEED SERVICE
To obtain service, see the Consumer Services page in
the back of this book.
We’re proud
of
our service and want you to be
pleased. If
for
some reason you are not happy with the
service you receive, here are three steps to follow for
further help.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. [n most
cases this will solve the problem.
2
NEXT, if you are still not pleased, write all the
details—including your phone number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
FINALLY, if your problem is still not resolved, write:
Major Appliance Consumer
Action Panel
20 North Wacker Drive
Chicago, IL 60606
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before
using
this appliance.
L
T
●
A
WARNING-When using this
appliance, always exercise basic safety
precautions, including the following:
●
Use
this appliance only for its intended purpose
as described
in
this Use and Care Guide.
a
●
This refrigerator must be properly
‘QJ;ti
installed and located in accordance
=..
with the Installation Instructions
before it is used.
If you did not receive an
Installation Instruction sheet with your
refrigerator, you can obtain on by calling, toll free,
the GE Answer
Center@,
800.626.2000.
,:
●
Never unplug your refrigerator by
pulling on the power cord.
Always
ii;
.::
grip plug firmly and pull straight out
from the outlet.
●
Repair or replace immediately all electric
service cords that have become frayed or
otherwise damaged.
Do not use a cord that
shows cracks or abrasion damage along its
length or at either the plug or connector end.
●
When moving your refrigerator away from
the wall, be careful not to roll over or damage
the power
cord.
c
Do
not allow children to climb, stand or
hang on the shelves in the refrigerator.
They
could damage the refrigerator and seriously
injure themselves.
a)
●
If your old refrigerator is
still
around
the house but not in use, be sure to
remove the doors.
This will reduce the
possibility of danger to children.
●
Don’t refreeze frozen foods which have thawed
completely.
The United States Department of
Agriculture in Home and Garden Bulletin
No. 69 says:
“..
.You
may safely refreeze frozen foods that have
thawed if they still contain ice crystals or if they are
still cold—below
40°F.
“..
.Thawed
ground meats, poultry or fish that have
any off-odor or off-color should not be refrozen and
should not be eaten. Thawed ice cream should be
discarded. If the odor or color of any food is poor
or questionable, get rid of it. The food may be
dangerous to eat.
“Even partial thawing and refreezing reduces the
eating quality of foods, particularly fruits,
vegetables and prepared foods. The eating quality
of red meats is affected less than that of many other
foods. Use refrozen foods as soon as possible to
save as much of their eating quality as you can.”
●
Unplug your refrigerator before
cleaning and making repairs.
NOTE:
We
strongly recommend that
any servicing be performed by a
qualified individual.
●
☛
Before replacing a burned-out
bulb,
unplug the
refrigerator or turn off the power at the circuit
bre&er
or fuse box in order to avoid contact with
a live wire filament. (A burned-out light bulb may
break when being replaced.)
NOTE:
Turning the
control to the OFF position does not remove
power to the light circuit.
Do not store or use gasoline or other flammable
vapors and liquids in
the
vicinity of this or
any
other appliance.
s
After your refrigerator is
in
operation,
do
not touch the cold surfaces in the freezer
compartment, particularly when hands are
damp or wet.
Skin may adhere to these
extremely cold surfaces.
SAVE THESE
INSTRUCTIONS
Q
If
your refrigerator has an automatic
icemaker,
avoid contact with the moving parts
of the
ejector
mechanism, or with the heating element
that releases the
cubes.
Do not place fingers or
hands on the automatic ice-making mechanism
while the refrigerator is plugged in.
TEMPERATURE CONTROL DIAL
The temperature control
dial has nine settings plus
“OFF.” “l” is the
warmest.
‘69>’
is the
coldest.
At first, set the
dial at “5.”
After using the
refrigerator, adjust the
dial if necessary.
4
Insert a coin into the slot
in the middle of the dial
and you can turn the dial
to the setting that’s best
suited to your needs.
Allow 24 hours for the
refrigerator to get cold.
NOTE: Turning the dial to “OFF” stops cooling
in both compartments—fresh food and freezer.
FRESH FOOD COMPARTMENT SHELVES
Shelf supports at various levels allow you to custom-space your shelves.
Half-Width Shelves (on some models)
One end of the shelf rests on
a molded side-wall support; a
bracket on the other end hooks into
a track on the rear cabinet wall.
To remove,
lift the shelf up at
front, then off the support and out
of the track.
To replace, select desired shelf
height. With shelf front raised
1A
I
slightly, hook the bracket’s top lug
1’
~p
into the track, then lower the shelf
❑
1
Tilt up
/
onto the support.
Note: The shelf
to the right of the
track is designed
l!!!
to hook into the
N
right-hand slot;
the shelf to the
left is designed
to hook into the
left-hand slot.
Full-Width Shelves
(on some models)
Some models have a steel wire
sliding shelf, a stationary tempered
glass shelf or two steel wire
stationary shelves. These shelves
can be relocated elsewhere in the
fresh food compartment.
The full-width
~
I
sliding shelf
has stop-locks.
—
”
When placed
correctly on the
k
11-
4A
s
top
b
e
f
ore
%
shelf supports,
the shelf
w1ll
coming completely out of the
refrigerator and will not tilt when
you place food on it or remove
food from it.
To remove the full-width shelves.
To remove a full-width shelf when
the fresh food compartment door
cannot be opened fully . . .
Lift the rear of the shelf and pull
forward.
lift the rear of the shelf, pull
forward and down, tilt the shelf
and take it out.
4
Some models have an ice-tray shelf and some models have a
full-width step shelf.
Ice-Tray Shelf
To remove the ice-tray shelf:
Lift the right side up off hooks at
top, then pull shelf to the right to
free its pins from holes in the
cabinet wall.
Iu
Step Shelf
To remove the step shelf:
1.
Lift left side of shelf slightly.
2. Move shelf to the left to free
its right ends from holes in the
cabinet wall.
3. Lower right side of shelf, move
shelf to the right and take it out.
To replace the step shelf:
----
1. With shelf tilted
as
shown,
fit left ends of shelf into holes in
cabinet wall.
2.
Lift left side of shelf slightly,
swing shelf up, fit right ends of
shelf into holes in cabinet wall,
and lower shelf into place.
Ice Trays
(on some models)
Ice trays are designed
to release ice cubes
easily. Hold tray
upside-
down over a container
and twist both ends
to
release cubes.
For only one or two
ice cubes, leave the tray
right-side up, twist both
ends slightly and remove
desired number of cubes.
//
Al
Wash ice trays and storage bin in lukewarm water
only.
Do not put them in an automatic dishwasher.
5
-—.
STORAGE DRAWERS
Fruit & Vegetable Drawers
The storage drawers at the bottom
of the fresh food compartment are
designed to provide high humidity
levels required by most vegetables
and lower humidity levels required
for most fruits.
When replacing the drawers,
always push them all the way in.
Storage time will depend upon the
type of food and its condition
when placed in the drawers.
Excess water which may
accumulate in the bottom of the
drawers should be emptied and the
drawers wiped dry.
High Humidity Drawer
(on some models)
This refrigerated drawer is
designed to keep unwrapped
foods fresh by retaining the natural
moisture content of foods such as:
● Artichokes . Cherries
●
Peas, green
● Asparagus ● Corn
s
Plums
●
Beets, . Currants
c
Radishes
topped
●
Greens,
●
Rhubarb
c
Blueberries
leafy
c
Spinach
●
Carrots
s
Lettuce
●
Tomatoes,
. Celery
●
Parsley
ripe
As in any refrigerated storage
area, it is recommended that
foods with strong odors be
stored wrapped—foods such as:
●
Broccoli
●
Cabbage
●
Parsnips
●
Brussels
● Cauliflower ● Turnips
Sprouts
●
Green Onions
Low Humidity Drawer
(on some models)
This refrigerated drawer is
designed to provide lower
humidity storage for items such as:
. Apples
. Oranges
●
Squash,
●
Apricots
. Peaches
summer
●
Grapes
. Pears
●
Strawberries
c
Mushrooms
●
Raspberries
●
Tangerines
●
Nectarines
Snacks Drawer
(on some models)
The slide-out Snacks drawer can be removed and
taken to the sink or food preparation area. You may
also relocate it and the shelf to which it attaches
within the fresh food compartment to suit your
storage needs.
6
—
(on some models)
Your icemaker will produce
eight cubes per
cycle—
approximately 100 cubes in a
24-hour period, depending on
freezer compartment temperature,
room temperature, number
of door
openings and other use conditions.
If your refrigerator is operated
before water connection is made
to the icemaker, keep the icemaker
feeler arm
in the STOP (up) position.
lcemaker\
~
~
Fee
Ier
arm in
position
When the refrigerator has been
connected to the water supply,
move the feeler arm to the ON
(down) position.
The ice cube mold will
automatically fill with water after
cooling to freezing temperature,
and first cubes will normally
freeze after several hours. When
cubes are solidly frozen, they will
be ejected from the mold into the
ice storage bin by means of a
sweeper arm. “
Icemaking will continue until the
feeler arm rests on the ice cubes in
the storage bin. For maximum ice
storage, level the stored cubes with
your hand occasionally. Be sure
nothing interferes with the swing
of the feeler arm.
The icemaker ejects cubes in
groups of eight and it is normal for
several cubes to be joined together.
Once your icemaker is in
operation, throw away the first
few batches of ice cubes. This
will flush away any impurities in
the water line. Do the same thing
after vacations or extended periods
when ice isn’t used.
Move the icemaker feeler arm to
the STOP (up) position when:
● Home water supply is to be off
for several hours.
● Ice storage bin is to be removed
for a period of time.
● Going away on vacation.
If ice is not used often, old cubes
will become cloudy and taste stale
and will shrink. Empty the ice
storage bin periodically and
wash it in lukewarm water.
If this is your first icemaker,
you’ll hear occasional sounds
that may be unfamiliar.
They are
normal icemaking sounds and are
not cause for concern.
Caution:
Under certain rare
circumstances, ice cubes
may be discolored, usually
appearing with a green-bluish
color. The cause of this unusual
discoloration is apparently due
to a combination of factors such
as certain characteristics of
local waters, household
plumbing and the accumulation
of copper salts in an inactive
water supply line which feeds
the icemaker. Continued
consumption of such discolored
ice cubes may be injurious to
health. If such discoloration is
observed, discard the ice cubes
and contact your GE Factory
Service Center or an authorized
Customer
Care@
servicer.
Water Filter Accessory
REMOVES ODORS
Activated charcoal granules
remove musty, stale odors.
IMPROVES TASTE
Activated charcoal granules
remove oily, medicinal, plastic
and metallic tastes.
REDUCES SCALE
Special crystals reduce hard
scale deposit formation.
The water filter is an option at extra
cost and is available from your GE
fiber cartridge catches dirt,
dealer. Specify
WR97X0214.
It has
rust particles, sand and silt.
complete installation instructions
and installs in minutes on 1/4”
O.D.
copper water line.
Water Supply Kit
A kit containing copper tubing,
shut-off
\’alve,
fittings and
instructions needed to connect the
icemaker to your cold water line is
available at extra cost. See
Preparation section.
Icemaker Accessory Kit
If your refrigerator did not come
already equipped with an automatic
icemaker, an Icemaker Accessory
Kit is available at extra cost.
Contact your local GE dealer and
specify Kit
IM-
1.
7
—
FOOD STORAGE SUGGESTIONS
Suggested Storage Times for Meat and Poultry*
Eating quality
DAYS IN
drops after
REFRIGERATOR
time
shown AT 35°
tO
40°
F.
(2”
to
4°
c.)
Fresh Meats
Roasts (Beef & Lamb). ... .. . .... .....3 to 5
Roasts (Pork & Veal) ..... ..3 to 5
Steaks (Beef). .3 to 5
Chops (Lamb).. .3 to 5
Chops (Pork)
.,,
3 to 5
Ground & Stew Meats 1 to 2
Variety
Meats, .... ...1 to 2
Sausage (Pork). ....1 to 2
Processed Meats
Bacon
.,.,
.....7
Frankfurters
....,,,,.,.,.,,,,,.,.,..,,,.,..,.,,.,.,,,
7
Ham (Whole) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Ham (Half) . . . . . . . . . . . . . . . . .
.
3 to 5
Ham
(Sllces)...,.,,..,.,.,.,,,,..,,,,,..,....,......,
3
Luncheon Meats 3 to 5
Sausage (Smoked) . . . . . . . . . . . . . . 7
Sausage (Dry & Semi-Dry) .............14 to 21
Cooked Meats
Cooked Meats and Meat Dishes . . . . . . . . 3 to 4
Gravy & Meat Broth 1 to 2
MONTHS IN
FREEZER
AT
0°
F.
(-18’ C.)
6 to 12
4 to 8
6 to 12
6 to 9
3 to 4
3 to 4
3
to 4
1
to 2
1
1/2
1 to 2
1 to 2
1 to 2
Freezing
not recom-
mended.
Eating quality
DAYS IN
drops after REFRIGERATOR
time shown AT 35°
tO 40° F.
(2” to 4°
c.)
Fresh Poultry
Chicken & Turkey (Whole) ................1 to 2
Chicken
(Pieces)
. . . . . . . . .........1 to 2
Turkey (Pieces) . . . . . . . . . . . 1 to 2
Duck & Goose (Whole) . . . . . . ..............1 to 2
Giblets
1
to 2
MONTHS IN
FREEZER
AT 0° F.
(-18° C.)
12
9
6
6
3
Cooked Poultry
Pieces (Covered
with
Broth)
,,............1
to 2
6
Pieces (Not Covered) . . . . . . . . . . . . . . . 3 to 4
1
Cooked Poultry Dishes . . . . . . . . . . . . 3 to 4
4 to 6
Fried Chicken . . . . . . . . . . . . . . . . . . . . . 3 to 4
4
(Other than for meats& poultry)
FREEZER
Most fruits and vegetables ................................................8.l 2 months
Lean fish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
...............................6-8 months
Fatty fish, rolls and breads, soups, stew, casseroles .........2-3 months
Cakes, pies, sandwiches, leftovers (cooked),
Ice
cream (original carton) ............................................1 month max
2 to 3
2 to 3
*
U.S. Department
of
Agriculture
Meats,
fish and poultry purchased from the store vary in quality and
age; consequently, safe storage time in your refrigerator will vary.
Fresh Food Storage Tips
To store vegetables:
●
Use the vegetable drawers. They have been designed to
preserve the natural moisture and freshness of produce.
● Covering vegetables with a moist towel helps
maintain crispness.
“
As
a
further aid to freshness, prepackaged vegetables
can be stored in their original wrapping.
Unfrozen meats, fish, and poultry:
“
Always remove store wrappings.
● Rewrap in foil, plastic wrap or wax paper and
refrigerate immediately.
Cheese:
● Wrap well with wax paper or aluminum foil, or put
in a plastic bag.
“
Carefully wrap to expel air and help prevent mold.
c
Store prepackaged cheese in its own wrapping if you wish.
Tips on Freezing Foods
There are three essential requirements for efficient
home freezing.
1. Initial quality.
Freeze only top-quality foods.
Freezing retains quality and flavor; it cannot
improve quality.
8
2. Speed. The quicker fruits and vegetables are frozen
after picking, the better the frozen product will be.
You’ll save time, too, with less culling and sorting
to do.
3. Proper packaging. Use food wraps designed
especially for freezing.
To freeze meat, fish and poultry,
wrap well in
freezer-
weight foil (or other heavy-duty wrapping material),
forming it carefully to the shape of the contents. This
expels air. Fold and crimp ends of the package to provide
a good, lasting seal. Don’t refreeze meat that has been
completely thawed; meat, whether raw or cooked, can
be frozen successfully only once.
Fine-quality ice cream, with high cream content, will
normally require slightly lower temperatures than more
“airy” already-packaged brands with low cream content.
● It will be necessary to experiment to determine the
freezer compartment location and temperature
control setting to keep your ice cream at the right
serving temperature.
● The rear of the freezer compartment is slightly
colder than the front.
New techniques are constantly being developed.
Consult the County Extension Service or your local
Utility Company for the latest information on
freezing and storing foods.
Cleaning—Outside
The door handles and trim (on some models) can be
cleaned with a cloth dampened with a solution of mild
liquid dishwashing detergent and water. Dry with a
soft cloth. Don’t wax handles or trim.
Keep the finish clean. Wipe with a clean cloth, lightly
dampened with kitchen appliance wax or mild liquid
dishwashing detergent. Dry and polish with a clean,
soft cloth. Do not wipe the refrigerator with a soiled
dishwashing cloth or wet towel. These will leave a
residue that can damage the paint.
Do not use scouring pads, powders or cleaners
containing bleach because these products can
scratch and weaken the paint finish.
Protect the paint finish. The finish on the outside of
the refrigerator is a high quality, baked-on paint
finish. With proper care, it will stay new-looking and
rust-free for years. Apply a coat of kitchen/appliance
wax when the refrigerator is new, and then at least
twice a year.
Appliance Polish Wax & Cleaner (Cat.
No.
WR97X0216)
is available from GE Service and Parts Center.
Cleaning—Inside
Clean the inside of the fresh food and freezer
compartments at least once a year. Unplug refrigerator
before cleaning. If this is not practical, wring excess
moisture out of sponge or cloth when cleaning around
switches, lights or controls.
Apply an appliance wax/polish to the inside surface
between the doors.
Use warm water and baking soda solution—about a
tablespoon of baking soda to a quart of water. This
both cleans and neutralizes odors. Rinse thoroughly
with water and wipe dry.
Other parts of the refrigerator—including door
gaskets, vegetable drawers, ice trays and all plastic
parts—can be cleaned the same way. After cleaning
the door gaskets, apply a thin layer of petroleum jelly
to the door gaskets at the hinge side. This helps keep
the gaskets from sticking and bending out of shape.
Do not use cleansing powders or other abrasive cleaners.
To help prevent odors, leave an open box of baking
soda in the rear of the refrigerator, on the top shelf.
Change the box every three months. An open box of
baking soda in the freezer will absorb stale freezer odors.
Do not wash any of your refrigerator’s plastic
parts in your automatic dishwasher.
Condenser
For most efficient operation, you need to keep the
condenser clean. Turn temperature control to OFF.
Remove the base grille, if your refrigerator has one.
Sweep away or vacuum dust that is readily accessible
on condenser coils, then turn the control back on.
For best results,
use a brush specially
,~
m
designed for this
purpose, such as
Cat. No. WX14X51,
~
k
.
,
,
-
.
.
b
available at GE Service
–
*
4
II
,~
and Parts Center. This
easy cleaning operation should be done at
least once a year.
To remove the
base grille:
Pull the grille out
from the bottom.
4
To replace the
base grille:
Line up the clips on
the back of the grille
with the openings in
the baseplate and push
the grille forward until
it snaps into place.
(continued next page)
9
CARE
AND CLEANING
(continued)
Drawer and Cover Removal
Full-Width Drawer with Plastic Cover
Drawers
will
stop
before
coming
all
the way out of
(on some models)
the
refrigerator, to help prevent contents from spilling
To remove the cover, lift it off
onto the
floor.
These drawers can be removed easily
its supports, pull it forward,
by grasping the sides and lifting up slightly while
tilt it
and
take it out.
pulling drawers past the “stop” location.
Twin Drawers with Glass Cover
(on some models)
To remove the glass cover:
1. Remove the drawers.
2.
Reach
in, push the front of ,
1:1
I
~]
ass
cover up and, at the
same time, pull it forward
as
far
as
it will
come.
~
g+;~~~
Ill --–”---––—VI
Tilt it and take it out. Avoid
;$.*&gy-
cleaning
the cold
glass
cover
with hot water because the
extreme temperature difference
~~
L-
,L-–
..=—
_..._>-
may cause it to break.
~ —--
I
j
-——
—.
II
\
I
k
L----
—-44
mmmmmm9@mmmmm9
3.
Remove the drawer frame. (Always remove the
gIaSS
cover
before you take out the drawer
frame. )
Lift the frame off the supports at each side and back,
pLill
it forward, tilt it and take it out.
To replace the glass cover:
1.
Lower the frame until it rests on the supports at
each side and back.
2. Replace the glass cover, pushing its rear edge
firmly into the rear frame channel and gently
lowering the front into place.
3.
Replace the drawers.
Light Bulb Replacement
A light
bulb
and socket are located
at
the top of the fresh food compartment
>
just behind the temperature control panel. To replace the bulb. unplug the
refrigerator from its electrical outlet, unscrew the
bu]b
when cool. and
replace with same size bulb.
p
‘~,,,,:
❑
fl,
J
—
--
—
— ---
—
-
r
1
*
t
—
II
Behind Refrigerator
Be careful moving your refrigerator away from the
and return it to position by pushing it straight in.
wall. All types of
floor
coverings can be damaged,
Moving your refrigerator in a side direction may result
particularly cushioned coverings and those with
in damage to your
floor
covering or refrigerator.
embossed surfaces.
After rolling the refrigerator back into place. turn the
Turn the leveling legs at each front corner of the
legs clockwise until the legs again bear the weight of
refrigerator counter-clockwise
until
the rollers support
the refrigerator.
the refrigerator; then pull the refrigerator straight out
10
Refrigerator Location
Clearances
Do not install refrigerator where
Do install it on a floor strong Allow the following clearances for
temperature will go below 60°F. enough to support a fully loaded ease of installation and proper air
because it will not run often
refrigerator.
circulation.
enough to maintain proper
The location of your refrigerator is Sides
.................................3/4”
temperatures.
important. Avoid locating it next to
Top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1“
a range, a heating vent or where the
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1“
sun will shine directly on it.
Rollers and Leveling Legs
Leveling legs near each front
corner of the refrigerator are
adjustable. They firmly position
the refrigerator and prevent it from
moving when the doors are opened.
Leveling legs should be set so the
front of the refrigerator is raised
iust
enough
that the doors close
o
d
K-
Rollers
next
to
the leveling legs
allow you to move the refrigerator
\
away from the wall for cleaning.
.
—
c-
Turn the legs counterclockwise until
the weight of the refrigerator is
transferred from them to the rollers.
After rolling the refrigerator back
~asily
wh~n
opened about halfway.
Turn the leveling legs clockwise
into place, turn the legs clockwise
until the lem
again
bear the
weight
to raise
the refrigerator,
of
the
refri~era~or.
counterclockwise to lower it.
Water Supply to Icemaker
(on some models)
If your refrigerator has an icemaker, or if you plan to add an icemaker later,
the icemaker will have to be connected to a cold water line. There should be
sufficient tubing for the icemaker from the cold water supply to allow
moving the refrigerator out from the wall several feet (approximately
8
feet
of 1/4” copper tubing in three 10-inch diameter coils). A water supply kit is
available at extra cost from your GE dealer.
Preparing to Move
Disconnect the power cord from the wall outlet,
remove all food and clean and dry the interior.
Secure all loose items such as grille, shelves, storage
drawers and ice trays by taping them securely in place
to prevent damage, and raise the leveling legs.
Be sure the refrigerator stays in an upright position
during actual moving and in the van. The refrigerator
must be secured in the van to prevent movement.
Protect the outside of the refrigerator with a blanket.
Preparing for Vacation
For extended vacations or absences, shut off power
to the refrigerator, turn the temperature control to the
OFF position, and clean the interior with baking soda
solution of one tablespoon of baking soda to one quart
of water. Wipe dry. To prevent odors, leave an open
box of baking soda in refrigerator.
Lea\’e
the doors open.
For shorter vacations, remove perishable foods and
leave the controls at regular settings. However, if
room temperature is expected to drop below
60”F.,
follow same instructions as for extended vacations.
If you have an icemaker, set it to the STOP position and
be sure to shut off the water supply to the refrigerator.
11
1
.—
INSTALLATION REQUIREMENTS
IMPORTANT... Please Read Carefully
How to connect electricity
For personal safety, this appliance must
Have the wall outlet and circuit checked by a qualified
be
nro~erlv
prounded.
electrician to make sure the outlet is properly grounded.
x
m
-u
If you have only a standard two-prong wall outlet,
The power cord of this
Preferred method
appliance is equipped
with a three-prong
>
(grounding) plug which
~
=
mates with a standard
three-prong
(grounding) .
.
wall outlet to minimize
the possibility of electric
shock hazard from
VP
, ‘ .
.
—
e
r
it is your personal responsibility and obligation to
have it replaced with a properly grounded three-
1
g\
%
>
‘.
Insure proper grounding
exists before use
this appliance.
prong wall outlet.
DO
NOT,
UNDER ANY CIRCUMSTANCES,
CUT
OR
REMOVE THE THIRD (GROUNDING)
PRONG FROM THE POWER CORD.
Use of Adapter Plug
Because of potential
safety hazards under
certain conditions,
we strongly
recommend against
use
of an adapter
plug. However, if
you still elect to use
an adapter, where
local codes permit,
a TEMPORARY CONNECTION may be made to
a properly grounded two-prong wall outlet by use
of a UL-listed adapter available at most local
hardware stores.
The larger slot in the adapter must be aligned with the
larger slot in the wall outlet to provide proper polarity
in the connection of the power cord.
this is not done, the adapter ground terminal is very
likely to break with repeated use.
Should the adapter ground terminal break, DO
NOT USE the appliance until a proper ground has
again been established.
Temporary method
CAUTION: Attaching an adapter ground terminal to
Adapter plugs not permitted
m
Canada.
Align large prongs/slots
~
~
the wall outlet cover screw does not ground the
m
appliance unless the cover screw is metal, and not
insulated, and the wall outlet is grounded through the
house wiring. You should have the circuit checked by
w
I
y;-”
●
““
, —- -
0
Q’
\
w“’
/
a qualified electrician to make sure the outlet is
properly grounded.
Insure proper grounding and firm
When disconnecting the power cord from the
connection exists before use.
adapter, always hold the adapter with one hand. If
Electrical Requirements
Use of Extension Cords
The refrigerator should always be plugged into its
Because of potential safety hazards under certain
own individual electrical outlet which has a voltage conditions, we strongly recommend against the use of
rating that matches the rating plate. an extension cord. However, if you still elect to use an
This provides the best performance and also prevents
extension cord,
it
is absolutely necessary that it be a
overloading house wiring circuits, which could cause
UL-listed 3-wire grounding type appliance extension
a fire hazard from overheating wires.
cord having a grounding type plug and outlet and that
the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.
12
These instructions are for changing the hinges from
the right side to the left side.
If you ever want to change the hinges back to the right
side, follow these same instructions (merely reverse all
references to left and right).
BEFORE YOU BEGIN
c
Read these instructions all the way through
before starting.
● Unplug the refrigerator from its electrical
outlet.
● Empty all door shelves, including the dairy
compartment.
. Provide a non-scratching work surface for
the doors.
ONCE YOU BEGIN
● Handle parts carefully to avoid scratching paint.
● Set screws down by their related parts to avoid
using them in the wrong places.
● When reinstalling door hinges, be sure to use
the same number of shims and washers as were
originally used.
●
IMPORT21NT:
Once you begin, do not
move the cabinet until the door-swing reversal
is completed.
TOOLS REQUIRED
● 5/16” hex-head socket screwdriver
I
●
●
●
●
Putty knife or thin-blade screwdriver
TZO orTZ5 Torxdriver ● 5/16”
I
Phillips screwdriver
open-end wrench
I
Masking tape
I
❑
REMOVE THE FREEZER DOOR.
a. Tape the door shut
Top
with masking tape.
Hinge
b.
Use a 5/16” hex-head
socket screwdriver to remove
the screws that hold the top
\
T?
II
hinge to the cabinet.
c. Lift the hinge (and shim
P
o
~~
e
glued to it) straight up to free ‘
the
hinge pin from the socket .
in the top of the door and set
it aside, along with its screws.
d.
Remove tape, tilt the door
~
w
away from the cabinet, and
carefully lift the door to free its bottom socket
from the hinge pin on the center hinge bracket.
e. Set the door on a non-scratching surface with
the outside up.
f. Using a Torxdriver, transfer the two screws
from the opposite side of the cabinet to the screw
holes vacated by the top hinge removal.
❑
REMOVE THE FRESH FOOD DOOR.
a.
Tape the door shut with
Center Hinge
masking tape.
b. Use a 5/16” hex-head
socket screwdriver and 5/16”
open-end wrench to remove
the two screws holding the
center hinge (and shim glued
to it) to the cabinet. Lift the
center hinge to free its pin
““
Pistic
Washer
from the socket in the top of
the door, and set hinge and
screws aside.
c. Remove tape, tilt door away from cabinet,
and lift it from the pin in the bottom hinge
bracket. (If the plastic washer sticks to the door
bottom, put it back on the hinge.)
d.
Set door outside-upon a non-scratching surface.
e. Using a Torxdriver, transfer the two screws
from the opposite side of the cabinet to the screw
holes vacated by the center hinge removal.
f. Take one of the screws removed in step (b)
and start it in the outermost screw hole on the
opposite side. Do not drive it all the way
down—leave enough space under the screw
head for thickness of shim and bracket.
13
—
—
R13VERSING
TllHE
DOOR SWING
(continued)
❑
REVERSE CABINET HARDWARE.
1. Transfer the bottom hinge to the left.
a. Remove the base grille if your refrigerator has
one. Grasp it at the bottom and pull it straight out.
IDE
b. Using a Torxdriver, remove the hinge bracket
(and shim glued to it), and plastic washer from
the bottom right side of the cabinet.
c. Reinstall the hinge bracket (and shim glued
to it) and plastic washer on the bottom left side
of the cabinet.
2. Transfer the top hinge to the left.
a. Remove the screws from the top left front
corner of the cabinet and reinstall them on the
right side.
LEFT SIDE
b.
Reinstall the top hinge (and shim glued to it)
on the left front corner of the cabinet, but do not
tighten the screws at this time.
❑
REVERSE THE DOOR HANDLES.
(on some models)
1. Transfer the fi-esh food door handle
to the right.
@
L
/
To
remove the handle...
a.
Remove the handle plug using a
tape-
tipped putty knife under the edge, and remove
the screw underneath.
b. Remove two screws holding the handle to the
top of the door.
c. Remove the
hanclle.
After removing the handle...
a.
Remove the screws from the right edge of
the door top and insert them into the handle
screw holes on the opposite side.
b. With
~ape-tipped
PLUG
putty kmfe or thin- BUTTON
~~-
blade screwdriver,
pry out the plug
button from the
\
A
i
hole on the opposite
side that was
vacated by removal
of the top hinge.
c. Pull the plug
button from the
front of the door and
transfer it to the
opposite side.
I
\
PLUG BUTTON
1
2. Transfer the door stop.
LEFT SIDE
Door Stop
,-
“
~~d
“-<~,.
:’
,,
@
o.>
“ /
II
,.
\
“...
,,
.+;”
o
Q
Q:>%
\
w
Q
%
?3
● Move the metal door stop from the right end
to the left end. Use a
Torxdriver.
/“
g%~$
/,
‘
/,
.
RIGHT SIDE
● Move any screws from the left end to the
right end.
When reinstalling the
fresh food door handle...
a.
Attach the handle to the right side of the door
with screws at the top and under the handle plug.
b. Reinstall the handle plug.
3. Transfer the freezer door handle to
the right.
a. Remove the screw holding the handle to the
top of the door and the two screws holding the
handle to the bottom of the door.
b. Remove the handle.
c. Remove the screw from the right top edge of
the door and insert it into the handle screw hole
on the left side.
d. Transfer the door stop as shown at left.
e. Attach the
handle to the right
edge of the door
with screws at top
and bottom, using
bottom holes
vacated by
removal of the
door stop screws.
❑
REHANG FRESH FOOD DOOR.
a. Lower the bottom
socket of the fresh
food door onto the
pin on the bottom
hinge. Be sure the
plastic washer is in
place on the pin.
Plashc
Washer
b. Insert the pin on
the center hinge into
the socket in the top
of the door. Note: The
center hinge must be
turned over as shown
when mounted on the
left side.
c. Tilt the door toward
the cabinet. As the
door is brought into
position, slide the hinge under the head of the
screw which earlier had been partly driven into
the outermost hole. Insert the remaining screw,
then tighten both screws securely.
15
❑
REHANG THE FREEZER DOOR.
a. Lower the
bottom socket of
the freezer door
onto the center
hinge pin. Be
sure the washer
is in place on
the pin.
b.
Tilt the door
toward the
cabinet, lifting
the top hinge so
the
pin
fits into
the
&ocket
on
I
the top of the door.
c. Before tightening the top hinge screws, make
sure the top of the door is level with the cabinet
top and the space between the doors is equal
across the entire front. Do not overtighten these
screws— tighten them until they are just snug,
then turn them in another one-half turn.
❑
EXAMINE THE DOOR GASKETS.
Check the door gaskets all around, making sure
no gaps are visible between the gaskets and the
cabinet. If a gap shows, try stretching the gasket
away from the door so the magnet in the gasket
will contact the cabinet surface, being careful not
to dislodge the gasket.
E
REPLACE THE BASE GRILLE.
(on some models)
a.
Pull the plastic
filler up and off
D
n
the base grille
*
and reinstall it on
the opposite side.
b.
Replace the
&
&
●
—
8
—.
——-
——-
;
—-
<
————
-–.—
/—
.
——
—--y-
=-
——-
—
base grille by
—
lining up the clips
‘::;i:!n’he..
He
~
on the back of the
baseplate and
pushing the grille
-
forward until it snaps into place.
~
RELOCATE THE PLASTIC-COVERED
SNACKS
DWWER.
(on some models)
For convenient access to the Snacks drawer
after reversing the door swing, you can move the
drawer to the other side of the cabinet.
1. Slide the drawer out and remove the shelf
to which it was attached.
2. Remove the other half-width shelf.
3. Push the drawer cover forward and up
off the shelf.
4. Put the cover on the other half-width shelf as
shown, flush to the side with the shelf-locking
lugs. Return both shelves to the refrigerator and
slide the Snacks drawer into its relocated cover.
16
CAUTION:
s
If you use your refrigerator before connecting
the water line, make sure the icemaker feeler
arm is kept in the STOP (up) position.
c
Do not install the icemaker tubing in areas
where temperatures fall below freezing.
● When using any electrical device (such as a
power drill) during installation, be sure the
device is insulated or wired in a manner to
prevent the hazard of electric shock.
● All installations must be in accordance with
local plumbing code requirements.
WHAT YOU WILL NEED
● A cold water supply is required for automatic
icemaker operation.
The water pressure must
be between 20 and 120
p.s.i.
●
Power drill,
unless you have a self-piercing valve.
● Copper tubing, 1/4” outer diameter to
connect the refrigerator to the water supply.
Be sure both ends of the tubing are cut square.
To determine how much copper tubing you
need: measure the distance from the water valve
on the back of the refrigerator to the water
supply pipe. Then add 8 feet.
Be sure there is
sufficient extra tubing (about 8 feet coiled into
3 turns of about 10 inches diameter) to allow the
refrigerator to move out from the wall after
installation. Do not use plastic tubing or plastic
fittings because the water supply line is under
pressure at all times. Also, certain types of
plastic tubing may become brittle with age and
crack, resulting in water leakage.
● Shutoff valve to connect to the cold water
line. The shut-off valve should have a water
inlet with a minimum inside diameter of 5/32”
at the point of connection to
the COLD WATER
LINE. Saddle-type shut-off valves are included
in many water supply kits. Before purchasing,
make sure a saddle-type valve complies with
your local plumbing codes.
● Two 1/4” outer diameter compression nuts
and 2 ferrules (sleeves) – to connect the
copper tubing to the shutoff valve and the
refrigerator water valve.
● If your existing water line has a flared fitting at
the end, you will need an adapter (available at
plumbing supply stores) to connect the water
line to the refrigerator OR - you can cut off the
flared fitting with a tube cutter and then use a
compression fitting.
WARRANTY INFORMATION
This water line installation is not warranted by
the refrigerator or icemaker manufacturer.
Follow these instructions
carefidly to minimize
the risk of expensive water damage.
❑
SHUT OFF THE MAIN WATER SUPPLY.
Turn on the nearest faucet long enough to clear
the line of water.
❑
INSTALL THE SHUTOFF VALVE ON THE
NEAREST FREQUENTLY USED DRINKING
WATER LINE.
Typical ways to connect to water
supply
~-
~fl
@~
~u
Through floor
Under
smk
Through wall to
In crawl
to basement
to cold utility
room cold
space under
cold water pipe
water
pipe
water pipe
house
a.
Choose a location for the valve that is easily
accessible. It is best to connect into the side of
a vertical water pipe. When it is necessary to
connect into a horizontal water pipe, make the
connection to the top or side, rather than at
the bottom, to avoid drawing off any sediment
from the water pipe.
b. Drill a 1/4” hole in the water pipe, using a
sharp bit.
Remove any burrs resulting from
drilling the hole in the pipe. (Do not drill a
hole if the valve is a self-piercing type.)
c. Fasten the shutoff
valve to the cold
water pipe with the
pipe clamp.
d. Tighten the clamp
screws until the
sealing washer
begins to swell. Do
Ical
water
not over-tighten or
you may crush the
copper tubing.
(continued next
page)
17
WATER LINE INSTALLATION INSTRUCTIONS
(continued)
❑
ROUTE THE COPPER TUBING BETWEEN THE
COLD WATER LINE AND THE REFRIGERATOR.
Route
the
tubing
through
a hole drilled in the
floor or wall (behind the refrigerator or adjacent
base cabinet) as close to the wall as possible.
Be
sure there is sufficient extra tubing (about 8 feet
coiled into 3 turns
of
about 10” diameter) to
allow the refrigerator to move out from the wall
after installation.
❑
CONNECT THE COPPER
SHUTOFF VALVE.
Place the compression
nut and ferrule (sleeve)
onto the end of the tubing
and connect it to the
shutoff valve. Make sure
TUBING TO THE
CompressIon nut
Saddle
type
!
shutoff valve
II
I
the tubing is fully
P
inserted into the valve.
d.
Remove the plastic flexible cap from the
water valve.
1/4” Copper
Tubing
e
e)
the tubing, ti~hten the fitting.
Fasten the copper tubing into the clamp
provided to hold it in a vertical position. You
may need to pry open the clamp.
I
❑
TURN THE WATER ON AT THE
r!
,.
I
Tighten the compression
~u~le~val~e
‘
‘
Ferrule
nut
securely.
(sleeve)
I ‘
---
SHUTOFF VALVE.
Tighten any connections that leak.
❑
TURN ON THE WATER AND FLUSH OUT
THE TUBING.
❑
PLUG THE REFRIGERATOR POWER CORD
INTO A GROUNDED ELECTRICAL OUTLET.
a. Turn the main water supply on and flush out
the tubing until the water is clear.
b.
Shut the water off at the water valve after
about one quart of water has been flushed
through the tubing.
H
❑
CONNECT THE COPPER TUBING TO
THE REFRIGERATOR.
Before making the connection to the
refrigerator, be sure the refrigerator power
cord is not plugged into the wall outlet.
We recommend installing a water filter
(available at service and parts centers)
if
your
water supply has sand or particles that
could
clog the screen of the refrigerator’s water valve.
Install it in the water
line near the refrigerator.
❑
SET THE ICEMAKER FEELER ARM TO THE
ON (DOWN) POSITION.
The icemaker will not begin to operate until it
reaches its operating temperature of 15° F or
below. It will then begin operation automatically
if the icemaker is in the ON (down) position.
NOTE:
The icemaker may double-cycle when it
first starts, causing some water spillage from the
icemaker into the ice bucket. This is normal and
should not happen again. The first few batches of
cubes should be thrown away, so that remaining
impurities in the water line will be flushed out.
I
❑
MOVE THE REFRIGERATOR BACK TO
THE WALL.
I
Arrange the coil of copper tubing so that it does
not vibrate against the back of the refrigerator or
against the wall.
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
REFRIGERATOR
DOES NOT
OPERA~
MOTOR OPERATES
FOR LONG PERIODS
MOTOR STARTS
&
STOPS FREQUENTLY
VIBRATION
OR
RATTLING
OPERATING
SOUNDS
FOODS DRY OUT
POSSIBLE CAUSE
c
May be in defrost cycle when motor does not operate for about 30 minutes.
● Temperature control in OFF position.
● If interior light is not on, refrigerator may not be plugged in at wall outlet.
● If plug is secure and the refrigerator still fails to operate, plug a lamp or a small
appliance into
the
same outlet to determine if there is a tripped circuit breaker or
burned out fuse.
● Modern refrigerators with more storage space and a larger freezer compartment
require more operating time.
●
●
●
●
●
●
Normal when refrigerator is first delivered to your home—usually requires
24 hours
to
completely cool down.
Large amounts of food placed in refrigerator to be cooled or frozen.
Hot weather—frequent door openings.
Door left open.
Temperature control is set too cold,
Grille and condenser need cleaning.
● Temperature control starts and stops motor to maintain even temperatures.
● If refrigerator vibrates, more than likely it is not resting solidly on the floor.
The front leveling legs need adjusting, or floor is weak or uneven.
Refer to Rollers/Leveling Legs.
. If dishes vibrate on shelves, try moving them. Slight vibration is normal.
●
●
●
The high speed compressor motor required to maintain near zero temperatures
in the large freezer compartment may produce higher sound levels than your old
refrigerator.
Normal fan air flow-one fan blows cold air through the refrigerator and freezer
compartments-another fan cools the compressor motor.
These NORMAL sounds will also
be
heard from time to time:
●
Defrost timer switch clicks at defrost.
● Defrost water dripping.
● Temperature control clicks ON or OFF.
● Refrigerant boiling or gurgling.
“
Cracking or popping of cooling
coils
caused by expansion and contraction
during defrost and refrigeration following defrost.
● Ice cubes dropping into the bin and water running in pipes as icemaker refills.
● Foods not covered, wrapped or sealed properly.
(continued next
puge)
19
(continued)
PROBLEM
FRESH FOOD
OR FREEZER
COMPARTMENT
TEMPERATURE
TOO WARM
FROST OR ICE
CRYSTALS ON
FROZEN FOOD
AUTOMATIC
ICEMAKER
DOES NOT WORK
(on some models)
CUBES TOO SMALL
SLOW FREEZING
OF
ICE
CUBES
ICE CUBES HAVE
ODOR/TASTE
MOISTURE FORMS
ON CABINET
SURFACE BETWEEN
THE DOORS
MOISTURE
COLLECTS INSIDE
REFRIGERATOR
HAS
ODOR
THE PROBLEM SOLVER
POSSIBLE CAUSE
c
Temperature control not set cold enough.
●
Wm
weather—frequent door openings.
.
Door
left open for
too
long
a
time.
●
Package holding door open or blocking air duct in freezer compartment.
● Frost within package is normal.
● Door may have been left ajar or there may be a package holding the door open.
●
Too frequent or too long door openings.
. Icemaker feeler arm in STOP (up) position.
●
Water supply turned off or not connected.
● Freezer compartment too warm.
●
Water shutoff valve connecting refrigerator to home water line may be clogged.
● Door may have been left ajar.
● Turn temperature control to colder setting.
● Old cubes need to be discarded.
Q
Ice
storage bin needs to be emptied and washed.
● Unsealed packages in refrigerator and/or freezer compartments may be
transmitting odor/taste to ice cubes.
● Interior of refrigerator needs cleaning.
● Not unusual during periods of high humidity. To help prevent rust, wipe surface
dry and reset temperature control one setting colder.
c
Tou
frequent or too long door openings.
● In humid weather, air carries moisture into refrigerator when doors are opened.
● Foods with strong odors should be tightly covered.
● Check for spoiled food.
● Interior needs cleaning.
. Defrost water system needs cleaning.
c
Keep open box of baking soda in refrigerator; replace every three months.
If
you need more help.. call, toll free:
GE Answer
Center@
800.626.2000
consumer information service
20
z
o
+
N
NOTES
We’ll Be There
With the purchase
of-your
new
GE appliance,
receive
the
assurmce
that
if’~x)u
e~wr
need
/
/
information m-assistance from
GE,
we’ll
be there. All
\TOU
have
to
clo
is
call—toll--f’ree!
.
In-Home Repair Service
800-GEXARES(800432-2737)
GEAnswer
Center@
80~6262000
W’hate\er
}(~ur
question
about
an~’
(;E
major appliance, GE .Inswel
(Uentc’rs
information scr~ice is a~ailahle to help. Your- call-and
J’OUX-
question-
\\’ill
lW
answered
promptl~”
and
collrteo~~sly.”
:Ind
JOU
can call
ln~
tirnc’.
(;1+;
.-ln~~~
er
Center”
ser~ice is ;)pen 24 hollrs a
&~~,
7 da)s a
;\’eek.
‘
I
kr
Customers With
801Z62ti2000
Upon request,
(;I;
will
pro~ide
Braille controls
for
a
~ariet~
of
(;kl
appliances, and a brf )chu re to
assist i n
plann
i n
,g
a
barric>r-f-ree
kitchen for person$
~$rith
lilnited
mobility.
‘1’()
ob~ain LheSe items,
fi-ee
of
charge, call 800.62
(;.2000.
Special Needs...
Service Contracts
800-626-2224
You can
ha~’e
the secure feeling that
(1E
(h)nsumer
Sert’ice
will
still be t l]ere
after
}our
ww-rant} expires. Purchase a
(;E
contract
\thile
~our
~j-arrant~
is still
in effect and
}roll
11
receit’e a substantial ciiscoun t.
Jj’ith
a lnultiple-~ear
(ont
ract.
you’re assured of’future
serkricc
zIL
L0day7’s prices.
Parts andAccessories
800-626-2002
Individuals qualified to service their own appliances
User maintenance instructions contained in this booklet
can have needed parts or accessories sent direct
1}
to
cover procedures intended to be performed by
any
user.
their home. The GE parts s}stem prot.ides access’ to ot’er
Other servicing generally should be referred to qualified
4’7,000
parts
. . and all
CJE
Genuine Renewal Parts are
service personnel. Caution must be exercised, since
fully warranted. VISA,
Master(;ard
and Ihsccm’er cards
improper servicing may cause unsafe operation.
are accepted.
—
YOUR GENERAL ELECTRIC REFRIGERATOR
Staple sales slip or
cancelled
check
WARRANTY
here. Proof of original purchase date
is needed to obtain service
under warranty.
1
I
1
WHAT IS COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor in
your home to repair or replace any
part
of
the
refrigerator
that fails
because of a manufacturing defect.
FULL FIVE-YEAR WARRANTY
For five years from date of original
purchase, we will provide, free of
charge, parts and service labor in
your home to repair or replace any
part of the sealed refrigerating
system
(the compressor, condenser,
evaporator and all connecting
tubing) that fails because of a
manufacturing defect.
This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
and Washington,
D.C.
In Alaska the
warranty is the same except that it
is LIMITED because you must pay
to ship the product to the service
shop or for the service technician’s
travel costs to your home.
All warranty service will be
provided by our Factory Service
Centers or by our authorized
Customer Care” servicers during
normal working hours.
Should your appliance need
service during the warranty period
or beyond, call 800-GE-CARES
(800-432-2737).
.
WHAT IS
NOT COVERED
● Service trips to your home to
teach you how to use the product.
Read your Use and Care material.
If you then have any questions
about operating the product please
contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
GE Answer Center
R
800.626.2000
consumer information service
s
Improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, plumbing and
other connecting facilities.
● Replacement of house fuses or
resetting of circuit breakers.
● Failure of the product if it is used
for other than its intended purpose
or used commercially.
c
Damage to product caused
by accident, fire, floods or acts
of God.
c
Loss of food due to spoilage.
WARRANTOR IS
/VOT
RESPONSIBLE FOR
CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state. consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
7
‘his book is printed on recycled paper.
E&-!Ezd
Top-Mount No-Frost 14 & 16 Models
6-93 CG
Printed in Louisville,
Ky
..—
—
