Loading ...
Loading ...
Loading ...
3. Lift up the front of the storage bin and pull it out.
4. Replace the bin by pushing it in all the way or the dispenser will
not work.
5. To restart ice production, lower the wire shut-off arm into the
On (down) position. Make sure the door is closed tightly.
Water Filtration System
Water Filter Status Light
The water filter status light will help you know when to change your
water filter.
■ When the dispenser control panel’s water filter status display
changes to “Order,” this tells you that it is almost time to change the
water filter cartridge.
■ Replace the water filter cartridge when the water filter status display
changes to “Replace.”
NOTE: If water flow to your water dispenser or ice maker decreases
noticeably, change the filter sooner. The filter should be replaced at
least every 6 months, depending on your water quality and usage.
Resetting the Filter Status
■ After changing the water filter, reset the status light by pressing
and holding the Filter button for 3 seconds.
When the system is reset, the “Order” and “Replace” icons will
disappear from the display screen.
Changing the Water Filter
1. Locate the water filter in the top-right corner of the refrigerator
compartment.
2. Lift open the filter cover door. The filter will be released and then
be ejected as the door is opened.
3. When the door is completely open, pull the filter straight out.
NOTE: There may be some water in the filter. Some spilling may
occur. Use a towel to wipe up any spills.
4. Take the new filter out of its packaging and remove the cap.
Be sure the O-rings are still in place after the cap is removed.
5. With the arrow pointing up, align the new filter with the filter
housing and slide it into place. The filter cover door will
automatically begin to close as the new filter is inserted.
6. Close the filter cover door completely in order to snap the filter
into place. You may need to press hard.
7. Flush the water system. See “Water and Ice Dispensers.”
Cleaning
Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid buildup
of odors. Wipe up spills immediately.
IMPORTANT: Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must thoroughly
clean both sections to eliminate odors. To avoid odor transfer and
drying out of food, wrap or cover foods tightly.
To Clean Your Refrigerator:
NOTE: Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, cleaning waxes, concentrated
detergents, bleaches, or cleansers containing petroleum products on
plastic parts, interior and door liners, or gaskets. Do not use paper
towels, scouring pads, or other harsh cleaning tools. SS model has
coating, Do Not Use regular SS cleaning products. Do Not Use
Stainless Steel Cleaner or Polish and use only mild soap, water, and
soft microfiber cloth to avoid damage to the stainless steel protective
coating. Paper towels scratch and may dull the clear coat of the painted
door. To avoid possible damage, use only clean clothes to polish and
wipe the door.
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior surfaces
thoroughly. Use a clean sponge or soft cloth and a mild detergent
in warm water.
3. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water.
4. There is no need for routine condenser cleaning in normal home
operating environments. If the environment is particularly greasy or
dusty, or there is significant pet traffic in the home, the condenser
should be cleaned every 2 to 3 months to ensure maximum
efficiency.
If you need to clean the condenser:
■ Remove the base grille. See the “Door Removal” instructions,
either in the User Instructions or the Installation Instructions and
Owner’s Manual, or in the separate instruction sheet provided
with your refrigerator.
■ Use a vacuum cleaner with a soft brush to clean the grille, the
open areas behind the grille and the front surface area of the
condenser.
■ Replace the base grille when finished.
5. Plug in refrigerator or reconnect power.
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
REFRIGERATOR CARE
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Loading ...
Loading ...
Loading ...