Loading ...
Loading ...
Loading ...
Intelligent dosing system en
33
Everyday use
Illuminated displays on the drawer
handle:
■
The display lights up if intelligent
dosing is selected for the
corresponding dispenser:
– w for dispenser ß (detergent),
– for the i I w illuminated display
for the combined compartment
i/ß, the lamp for the
appropriate dispenser content
lights up:
i for fabric softener/w for
detergent. ~ Page 31
■ The display flashes if the fill level of
the selected intelligent dosing
dispenser is below the minimum
level.
(De)selecting intelligent dosage and
adjusting the dosage strength:
The intelligent dosages for detergent
and fabric softener are set at the factory
for programmes in which intelligent
dosing can be used.
Overview of programmes ~ Page 16
The dosage strength has been preset to
low (lightly soiled laundry) for
detergent w and to medium (medium
level of softness) for fabric softener i.
It can be changed for each programme.
~ Page 24
In addition to intelligent dosing, cleaning
aids (e.g. stain remover) can be added
manually to compartment v u, if
necessary. ~ Page 35
Note: Depending on the programme,
the selection (on/off) as well as the
relevant dosage strength that has been
selected for i-DOS i I w and i-DOS w
are saved until they are changed, even
when the machine is switched off.
Topping up the detergent/ fabric
softener:
If, while intelligent dosing is selected,
the respective illuminated display
flashes and there is corresponding
information on the display panel, this
indicates that the minimum fill level has
not been reached. The content is
sufficient for approx. 3 washes.
The same detergent or fabric softener
can be added at any time. If you change
product/manufacturer, we recommend
that you clean the dispensers first.
~ Page 38
If required, adjust the basic dosage.
Base dosage
The basic dosages are:
■
For detergents – based on the
manufacturer’s recommendation for
average soiling and the respective
water hardness.
■ For fabric softeners – based on the
manufacturer's recommendation for
a medium level of softness.
Refer to the packaging label of your
detergent/fabric softener or ask the
manufacturer directly for this
information.
To find out the hardness of your water
supply, use a test strip or check with
your water supplier.
Loading ...
Loading ...
Loading ...