Loading ...
Loading ...
Loading ...
9
Procedures for exchanging filters
· All used filters, bags, and debris must be treated as a
hazardous substance and must be disposed of in
accordance with all federal, state, and local regulations.
· Pre-filter
Grasp the snap lockings and pull them outwards. Lift lid
up from the container. The pre filter is located at the motor
stand in the middle of the cleaner. Clean the sealing
surfaces before reinstalling the new pre-filter.
· HEPA filter
The HEPA filter is placed inside the lid. Grasp the snap
lockings and pull them outwards. Lift lid up from the
container.
HEPA filter pre mounted in new lid
There is a complete after sale HEPA filter unit kit for the
GD 930 and GD 930 S2 available (part number 140 7801
510). This kit contains the outer lid and the HEPA-filter
pre mounted in this lid. This is a comfortable way to replace
HEPA filter.
To add HEPA filter pre mounted in lid: Using care not
to dislodge any debris, clean the sealing surfaces before
reinstalling the new lid/HEPA filter assembly. Remove
the old lid from container and replace with the new lid/
HEPA filter assembly. Secure new lid to the machine
with the snap locks.
HEPA filter not pre mounted in the lid
If you only want to replace the HEPA filter follow these
instructions: Remove the filter lid from the container.
The HEPA filter is located inside the lid and is attached
to the cover at 4 points around the lid. Hold the lid by
the edge with one hand and gently separate the filter
holder from the lid with your other hand.
To add new HEPA filter to the lid
Install the HEPA filter into the cleaner with the “HEPA”
label facing outwards. Make sure the filter holder is
securely attached at all 4 points around the lid.
Replace the lid onto the container and secure the lid
using the snap locks.
Warning! Hazardous dust may be discharged by the
machine if the filter is not properly secured.
Service Instructions
· If this cleaner has been used to pick-up hazardous
substances in an enclosed contaminated environment,
the internal components may be contaminated.
· External decontamination of the cleaner must be carried
out. However, external decontamination will not eliminate
any internal contamination. Any servicing involving
disassembly must be done inside of a contained
environment by trained service personnel using
appropriate personal protective clothing and respiratory
protection.
· Any replaced components or debris collected during
servicing should be treated as a hazardous substance
and must be disposed of in accordance with all federal,
state, and local regulations.
· All gaskets should be replaced anytime the unit is
disassembled to assure high machine efficiency.
USE AND SERVICE INSTRUCTIONS
WHEN USED IN HAZARDOUS SUBSTANCE
RECOVERY
822 9393 060 Instruction for use GD 930 US.p65 9/13/2006, 2:01 PM9
www.sylvane.com
1 (800) 934-9194
Loading ...
Loading ...
Loading ...