Loading ...
Loading ...
Loading ...
BISSELL.com 9
1. Turn OFF your machine.
Remove the dirt tank by sliding
the latch on the front.
2. Grab the top of the tank
and pull up. This will activate a
wiping feature to remove debris
from the mesh filter screen.
3. Remove the separator from
the tank and tap on the side of
the trash bin.
4. Dump dirt from the tank
into the trash bin.
5. Slide the separator back
into the tank, ensuring the
notch is seated into the tank
correctly.
6. Guide the notched out area
on the bottom of the tank onto
the hook on the hand vacuum.
Push into place.
Emptying the Dirt Tank
More of a video person? Go to support.BISSELL.com for additional how-to videos.
WARNING
Before using your vacuum, make sure that the dirt tank is in locked position and that all filters, both pre- and post-motor filters,
are in place. DO NOT operate your vacuum without these filters.
Removing the Brush Roll
Go to support.BISSELL.com for a full list of maintenance and troubleshooting support.
1. Turn the machine OFF and
press the foot release button
to disconnect the foot from the
extension wand.
2. Remove the sole plate from
the bottom of the foot by
unscrewing the seven screws
with a Phillips-head screw
driver.
3. Pull the brush roll straight
up and out of the chamber
to remove. Clear debris from
brush roll, chamber, and
suction channel.
1
2
Loading ...
Loading ...
Loading ...