Loading ...
Loading ...
Loading ...
GB
12f
SCREW FITTING
For hoods without snap-on side supports only.
• Fix the hood to the hanging unit using
the screws 12f (3.5x16 self-threading)
provided.
13
259
L1
INSTALLATION
Drilling the Support surface and Fitting the Hood
Make a rectangular opening on the base of
the hanging unit, leaving a minimum of 13
mm from the outer edges.
Hood Type 52 70
L1 497 677
SNAP-ON FITTING
For hoods with snap-on side supports only, set up for a support panel thickness of between 15
mm and 30 mm.
• Insert the hood until the side supports
snap into place.
• Lock in position by tightening the
screws Vf from underneath the
hood.
Loading ...
Loading ...
Loading ...