Loading ...
Loading ...
Loading ...
www.adj.com
12
RECEIVE (DMX CONTROL) MODE
This mode allows the device to be used as a 1, 2, or 4 channel DMX controlled Switch or Dimmer pack.
In Switch mode, selected channel outputs can be switched ON/OFF via DMX.
In Dimmer mode, select channel outputs can be gradually dimmed UP or DOWN via DMX.
See the chart on page 14 for DMX ON/OFF values.
1. Connect the pack to an appropriate power source and switch the power to ON.
2. Press the MODE button to select Receive (DMX CONTROL) Mode.
The MODE LED will be illuminated next to the word Receive. (see LED display image below)
3. Set the desired DMX Address (001-512) for the pack by pressing UP or DOWN buttons.
The DMX Address can also be set from a DMX controller using RDM (Remote Device Management).
4. Set the desired Channel mode by pressing the MENU button once, then pressing the UP or DOWN
buttons to select 1, 2, or 4 channel mode. (see LED display images below)
Using CH:01 mode groups all 4 output channels together.
Using CH:02 mode groups output channels 1 and 2 together and output channels 3 and 4 together.
Using CH:04 mode allows individual control of each output channel separately.
A:001
Loading ...
Loading ...
Loading ...