INSTALLATION: *Product May Not Look Exactly As Shown In Figures.
W-2
05/12
WALL SCONCE
Fixture
Ring
Screws
Handles
Style 1
Style 2
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
TOOLS AND MATERIALS REQUIRED:
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
Star-headed
Screwdriver
Wire Cutters
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
Wrench
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
4. CLEAN GLASS WITH WATER ONLY.
Mounting
Bracket
Electrical
Outlet Box
White
Black
Nipple
Mounting Bracket
Hex Nut
Fixture
Hex Nut
Cap Nut
Stem
Star washer
Glass
Finial
Decorative
Cap
House supply
Ground wire
Fixture
Ground wire
Hex Nut
Fibre
Washer
Star
Washer
1.
Attach nipple to mounting bracket. Adjust so it will clear hole in back
of fixture and then lock nipple in place with hex nut.
2.
Attach mounting bracket to electrical outlet box with electrical box
screws (not included).
3.
Connect the ground wires (bare copper or green) from your fixture to
the ground wire (bare copper or green) or ground screw in the electrical
outlet box.
Connect electrical wires of fixture to wires in electrical box by
marretting white wire to white wire, then black wire to black wire. Once
connections of wires are completed, carefully tuck wires and wire nuts
into the outlet box making sure no bare wire (on the black and white) is
visible at the wire nuts.
4.
Tuck electrical wires into electrical box. Position hole in fixture over
nipple and secure in place with
star washer and cap nut.
5. Style 1:
May not be applicable to some models. Secure the ring
(handles) to the back plate with screws provided.
Style 2:
Secure the ring to the back plate with screws provided. Install
the stem to the fixture by hex nut and star washer.
6.
Install proper bulb type and wattage
(not included)
.
7.
Adjust the nipple until it will pass through the glass and cap, then
secure in place with fibre washer and hex nut (only available for some
models). Position the glass shade and hold in place with
fibre washer, hex
nut,
decorative cap and finial.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
SAFETY PRECAUTIONS:
Hex Nut
Screws
Stem
Star washer
Ring
