Loading ...
Loading ...
Loading ...
40 - USE 91477A143/A
tip of the probe.
Positioning the probe
1. Place the food on a tray.
2. Insert the tip of the probe into the food
before you place it in the oven.
3. For best results, make sure that the
temperature probe is placed transversely in
the thickest part of the food and for least 3/
4 of its length. Make sure that it does not
touch the tray underneath and that it does
not protrude from the food.
Setting cooking parameters when using the
temperature probe
With cold oven:
1. Turn the function knob to select the required
function.
2. Open the oven door.
3. Insert the tray on which the food has been
placed into the appropriate guides.
4. Insert the plug of the temperature probe into
the socket at the side, using the probe to
open the protective cover.
5. Close the door.
The display shows (75°C is the
proposed default target temperature).
6. Use the increase and decrease
keys to set the target temperature.
Press the clock key or wait a few seconds to
start the preheating stage, followed
Do not install any telescopic guides on
the fourth shelf from the bottom, as they
would not allow access to the
temperature probe side socket.
In order for the probe to measure the
core temperature of the food precisely,
its tip must not be in contact with bones
or fat.
The recommended minimum
temperature for cooking with the probe
is 120°C, with the exception of slow
temperature cooking.
Attention: during use, the accessible
parts become very hot. Protect your
hands with heat-proof gloves when
connecting the temperature probe and
when handling food inside the oven
cavity.
The temperature range that can be
selected is from a minimum of 40°C to
a maximum of 90°C.
It the temperature of the oven is set too
low, the appliance automatically sets
the minimum temperature necessary in
order to reach the selected target
temperature.
For best results, it is recommended to set
a cooking temperature higher than the
target temperature.
If, while cooking using the temperature
probe, for any reason it is necessary to
disconnect the probe without using the
knobs or the display, the function
proceeds as normal cooking.
Loading ...
Loading ...
Loading ...