Loading ...
Loading ...
Loading ...
Page 2 Protimeter Surveymaster
2 Pin (WME) Mode Operation (cont.)
Check which operational mode the instrument is in by looking at
the letters in digital display %WME indicates the Surveymaster
is in Measure mode, REL))) indicates the meter is in Search
mode. If the instrument is in Search mode, press to switch
to Measure mode. %WME will appear in the display.Push the
pins firmly onto the surface of the material at the required point
of measurement.Read the moisture level value from the display
and note the moisture condition of the material from the color
coded LED scale.
Note: Measurements taken in wood are actual % moisture
content values, whereas readings taken in material other
than wood are % Wood Moisture Equivalent (%WME)
values - see Pin Mode Interpretation for more details.
3 Using Auxiliary Moisture Probes in Pin
(%WME) Mode
The Surveymaster is supplied with a Heavy Duty Moisture
Probe and lead for taking measurements at points that cannot be
reached easily with the integral electrode pins. To use, connect
the Moisture Probe jack plug to the socket on the right side of
the instrument and push the Probe pins onto the surface at the
chosen point of measurement.
A pair of Deep Wall Probes can also be used for taking readings
at depth in walls and floors. To use, drill two clearance holes of
diameter 6mm (1/4'') roughly 40mm (1 1/2'') apart to the
required depth. Connect the Deep Wall Probes to the instrument
and push the two probe rods into the clearance holes. Hold them
firmly against the base of the holes and take the reading.
The Protimeter Hammer Electrode can also be used to make
measurements deep into hard and softwoods.
Loading ...
Loading ...
Loading ...