Loading ...
Loading ...
Loading ...
QUICK
RINSE
Use this rinse cycle for Do not
rinsing dishes, glasses, use
and silverware that will detergent
not be washed right with this
away. cycle.
Wash Main Rinse Final Dry Time Water
Wash Rinse (min) Usa e
(gal/gl_)
• 10 2,2/8.3
Anytime during a cycle, press
O
CANCEL/DRAIN glows. The dishwasher pauses for about
5 seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely. The light goes off when the
dishwasher finishes the drain.
To stop the drain
You can press Cancel/Drain again to stop the drain
immediately. Remember to drain the dishwasher before
starting a new cycle.
NOTE: A small amount of water remains in the dishwasher.
This is normal.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear
all options and cycles.
During the first minute of a cycle
Press a new cycle and/or options.
After the first minute of a cycle
1. Press
CANCEL/DRAIN glows. The dishwasher pauses for 5
seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely.
2. Check the detergent dispensers. Ifthe main wash cup
has opened and the detergent washed away, refill the
cups as needed.
3. Close the door.
4. Press a new cycle and/or options.
5. Press START.
You can add an item anytime before the main wash starts.
Open the door and check the detergent dispenser. If the
main wash section is still closed, you can add items.
To add items
1.
2.
Lift up the door latch to stop the cycle. Wait for the
spraying action to stop before opening the door.
Open the door. If the main wash detergent dispenser is
still closed, add the item.
.
4.
Close the door, but do not latch it. Wait 30 seconds for
the air in the dishwasher to warm up. This reduces the
amount of moisture escaping from the vent when
restarting a cycle.
Close the door firmly until it latches. The dishwasher
resumes the cycle after about a 5 second pause.
You can customize your cycles by pressing an option. If
you change your mind, press the option again to turn the
option off. Select a different option if desired.
You can change an option anytime before the selected
option begins. For example, you can press an unheated
drying option any time before drying begins.
Press START to use the same cycle and option(s) as the
previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle,
when you press Start, the dishwasher runs the last full
wash cycle and options.
Water Heat
Select this option to heat the water to 140°F (60°C) during
parts of the cycle. (See the Cycle Chart.) Heating the water
helps improve washing results. This option adds both heat
and wash time to parts of the cycle.
NOTE: Pots Pans automatically uses this option. Water
Heat is an option with the Normal Wash and Water Miser
cycles.
14
Loading ...
Loading ...
Loading ...