Loading ...
Loading ...
Loading ...
throttle control lever up.
• To stop the engine, make sure the clutch
lever is all the way back or up and move
the throttle control lever to the STOP
IO position.
Z_ CAUTION: Never run the engine
indoors or in a poorly ventilated area.
Engine exhaust contains carbon monoxide,
an odorless and deadly gas. Keep hands,
feet, hair and loose clothing away from any
moving parts on the engine or edgerl
trimmer. Avoid the muffler and surrounding
areas. Temperatures may exceed 150 ° F.
EDGING TIPS
• Edging is best performed when conditions
are dry. Ifthe soil is to wet, dirt becomes
packed in and around the blade causing
premature belt wear and decreased
performance.
• If dirt does become packed around the
blade, stop the engine, remove the spark
plug wire, and remove the packed debris
before continuing to edge.
CUSTOMER RESPONSIBILITIES
• If very deep edging is required, we
recommend that a shallow cut be made
first, then cuts at greater depth until the
desired depth is obtained.
• Uniform edging can be performed when
the blade guide rides on and against the
surface which you are edging.
• Edging can be customized by varying the
number of passes and by the distance
your blade isfrom the surface you are
edging.
PRODUCT SPECIFICATIONS
Horse Power: 3.8
Displacement: 9.52 cu. in. (156 cc)
Gasoline Capacity: 2.0 qt. (unleaded)
Lubrication: 20 oz. SAE-30W
Spark Plug: Champion CJ-8 or
Equivalent
SCHEDULE SERVICE
DATES
Fill In dates as After Before Frs- E_ary Every Every Begin Before
you complete First Each qusntly 10 25 Each Storage
regular service 2 use Hours Hours Houn Season
Hours
Lubricateall PivotPoints p,t
Lubricate Wheel Axles _vj
Check Engine Oil Level p_,
Change EngineOil p_' _
Replace Air Cleaner Filter p_'
Check Spark Plug _ p,4
Check Drive Bell . V"
,1
Tighten All Screws and Nuts p_
Check BladeWear/Damage p_
GENERAL RECOMMENDATIONS
The warranty on this edger/trimmer does
not cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, the operator
must maintain the edger/trimmer as in-
structed in this manual. The above chart is
provided to assist the operator in properly
maintaining the edger/trimmer.
11
Loading ...
Loading ...
Loading ...