Loading ...
Loading ...
Loading ...
LISTENING TO RECORDS
1. Connect the external amplier device.
2. Place a record on the turntable, over the central spindle. Place the EP adapter
over the central spindle when playing 45 rpm records.
3. Set the Speed Selector to 33 or 45 rpm according to the record.
4. Release the tone arm clamp, and remove the needle cover from the stylus.
5. Lift the Tone arm with the Tone arm Lift Lever.
6. Move the tone arm to the beginning of the record, or to the start of a
particular track.
7. Gently lower the tone arm onto the record with the Tone arm Lift lever to
start playing.
8. When the record is nished the tone arm will automatically stop. To stop
manually, lift the tone arm from the record and return it to the rest.
NOTES:
• Remove the needle cover before you balance the tone arm.
• Hold tone arm whenever you make any adjustment or action so as to protect the
tone arm.
• Do not try to adjust the balance weight while playing a record as this could break
the needle and scratch the record.
• Re-secured the tone arm before transportation to protect the needle.
• Remove the balance weight before transportation to prevent damage or breakage
to the unit.
• Do not stop or turn the platter manually. Moving or jarring the turntable without
securing the Tone arm clamp could result in damage to the Tone arm.
ANTI-SKATING
Normally the anti-skating should be set to its minimum setting. Anti-skate com-
pensates for inward tracking forces that occur with certain pick-up when the stylus
nears the center of the record. If the turntable is experiencing excessive skipping
while nearing the center spindle, try increase the anti-skating in the increments
indicated on the dial. Start by adding an increment of 1, test its performance, then
increase it more, and so on.
NOTE: During adjusting the anti-skating knob, leave the tone arm and balance
weight alone to prevent damaging the stylus (needle).
ENEN
PHONO OUT OPERATION
1 .Switch the PRE-AMP OFF/ON SWITCH to OFF position.
2. Plug one end of the cable (included) into the PHONO OUT socket at the back of
the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the PHONO IN socket of your home
amplier device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on your amplier device.
HEADPHONE OPERATION
1. Connect a set of headphone (not included) on the Earphone socket on the front
panel of the unit.
NOTE: Never put on the headphone till you have plugged in the headphone plug
USB-PC Function, Audacity Software
Full instruction for the Audacity Software USB-PC Function can be found at:
http://www.audacityteam.org/download/
LOCATION OF CONTROLS
1. Spindle
2. Turntable
3. 45 Rpm adaptor
4. Balance weight
5. Anti-skating knob
6. Tone arm lift level
7. Tone arm rest holder
8. Tone arm
9. Stylus
10. Off / 33/45 knob
11. Needle cover
12. Earphone socket
13. Rca output sockets
14. Pre-amp off/on switch
15. Usb socket
16. Ac power socket
Loading ...
Loading ...
Loading ...