STIR IT UP TURNTABLE
RECORD PLAYER INSTRUCTIONS
Welcome to the House of Marley.
We are honored you have selected the Stir It Up
Turntable to become part of your music experience.
The Stir It Up features design and material cues from
our Get Together BT speaker and retro-design details
of turntables from the Bob Marley era (1960-1980).
Simple forms with rich materials, fit and finishes.
Let the natural materials shine.
EN
POWERING YOUR STIR IT UP TURNTABLE
Your Stir It Up turntable uses an AC power supply and is powered by a standard
wall outlet.
1. Insert the AC power supply into Stir It Up.
2. Insert the wall plug into an appropriate wall outlet.
EASY TO USE
1. Connect the AC power supply to the household outlet.
2. Rotate the OFF / 33/45 knob to turn on the unit and Select the speed according
to the record you are playing.
3. Put a record on the turntable. Remember to use the 45 RPM adaptor located on
the top right corner when playing a 45 RPM record.
4. Lift and move the tone arm to turntable. Place the tone arm on the edge of the
record and the record starts playing.
5. Assemble the balance weight and set it to a proper position.
NOTE: The balance weight is to adjust the pressure of the needle. If the pressure is
too much, the sound will become distorted; if the pressure is too little, track skipping
will easily happen. Please adjust the balance weight by turning the balance weight
clockwise or counter-clockwise.
6. To pause or stop playing, you need to lift and move the tone arm back to the tone
arm rest manually.
7. When the end of the record is reached, the tone arm and rotation stop. Lift the
tone arm and place it to tone arm rest manually.
CONNECTIONS
CAUTION: Switch off the power to all equipment before making connections. Read
the instructions of each component you intend to use with this unit. Be sure to insert
each plug securely. To prevent hum and noise, avoid bundling the signal intercon-
nection cables together with the AC power cord.
LINE OUT OPERATION
1.Switch the PRE-AMP OFF/ON SWITCH to ON position.
2. Plug one end of the RCA cable (included) into the LINE OUT socket at the back
of the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the LINE IN socket of your home
amplier device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on the amplier device.
BEFORE USE
1. Choose unit installation location carefully. Avoid placing it in direct sunlight or
close to a source of heat. Also avoid locations subject to vibrations and excessive
dust, cold or moisture. Keep away from sources that hum, such as transformers
or motors.
2. Do not open the cabinet as this may result in damage to the circuitry or electrical
shock. If a foreign object should get into the set, contact Customer Service.
3. Be sure not to handle record with dirty ngers. Never play a record that has a
crack on the surface.
4. When removing the power plug from the wall outlet, always pull directly on the
plug, never pull the cord.
5. To protect the stylus, don’t forget to put on the white protective needle cover
after use.
6. Do not attempt to clean the unit with chemical solvents as this might damage the
nish. Use a clean, dry cloth.
7. In order to shut off the power to this product completely, unplug the power cord
from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an
extended period of time, such as a vacation.
8. Keep this manual in a safe place for future reference.
ASSEMBLY
1. Take all the components from the package and then place the product on a
stable surface.
2. Surround the belt on the bottom of metal platter. Make sure the belt is not
installed twisted. Use your thumb to stretch the belt as the illustration below.
3. Reverse the platter and don’t forget to keep holding the belt. Then match the
spindle and insert the platter to the unit.
4. Surround the belt which is held with your thumb into the main (white) rotation
column of the triangular arrangement gear columns.
5. Place the turntable mat on the platter. Then the main assembly is accomplished.
NOTE: To disassemble the turntable, directly grasp the turntable and pull it upward
6. Remove the counterweight and place it in it’s proper location on the Tone arm
(refer to illustration)
7. Remove the 45rpm adapter and place it in it’s new home located in the top right
corner of the record player.
ENEN
POWERING YOUR STIR IT UP TURNTABLE
Your Stir It Up turntable uses an AC power supply and is powered by a standard
wall outlet.
1. Insert the AC power supply into Stir It Up.
2. Insert the wall plug into an appropriate wall outlet.
EASY TO USE
1. Connect the AC power supply to the household outlet.
2. Rotate the OFF / 33/45 knob to turn on the unit and Select the speed according
to the record you are playing.
3. Put a record on the turntable. Remember to use the 45 RPM adaptor located on
the top right corner when playing a 45 RPM record.
4. Lift and move the tone arm to turntable. Place the tone arm on the edge of the
record and the record starts playing.
5. Assemble the balance weight and set it to a proper position.
NOTE: The balance weight is to adjust the pressure of the needle. If the pressure is
too much, the sound will become distorted; if the pressure is too little, track skipping
will easily happen. Please adjust the balance weight by turning the balance weight
clockwise or counter-clockwise.
6. To pause or stop playing, you need to lift and move the tone arm back to the tone
arm rest manually.
7. When the end of the record is reached, the tone arm and rotation stop. Lift the
tone arm and place it to tone arm rest manually.
CONNECTIONS
CAUTION: Switch off the power to all equipment before making connections. Read
the instructions of each component you intend to use with this unit. Be sure to insert
each plug securely. To prevent hum and noise, avoid bundling the signal intercon-
nection cables together with the AC power cord.
LINE OUT OPERATION
1.Switch the PRE-AMP OFF/ON SWITCH to ON position.
2. Plug one end of the RCA cable (included) into the LINE OUT socket at the back
of the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the LINE IN socket of your home
amplier device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on the amplier device.
BEFORE USE
1. Choose unit installation location carefully. Avoid placing it in direct sunlight or
close to a source of heat. Also avoid locations subject to vibrations and excessive
dust, cold or moisture. Keep away from sources that hum, such as transformers
or motors.
2. Do not open the cabinet as this may result in damage to the circuitry or electrical
shock. If a foreign object should get into the set, contact Customer Service.
3. Be sure not to handle record with dirty ngers. Never play a record that has a
crack on the surface.
4. When removing the power plug from the wall outlet, always pull directly on the
plug, never pull the cord.
5. To protect the stylus, don’t forget to put on the white protective needle cover
after use.
6. Do not attempt to clean the unit with chemical solvents as this might damage the
nish. Use a clean, dry cloth.
7. In order to shut off the power to this product completely, unplug the power cord
from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an
extended period of time, such as a vacation.
8. Keep this manual in a safe place for future reference.
ASSEMBLY
1. Take all the components from the package and then place the product on a
stable surface.
2. Surround the belt on the bottom of metal platter. Make sure the belt is not
installed twisted. Use your thumb to stretch the belt as the illustration below.
3. Reverse the platter and don’t forget to keep holding the belt. Then match the
spindle and insert the platter to the unit.
4. Surround the belt which is held with your thumb into the main (white) rotation
column of the triangular arrangement gear columns.
5. Place the turntable mat on the platter. Then the main assembly is accomplished.
NOTE: To disassemble the turntable, directly grasp the turntable and pull it upward
6. Remove the counterweight and place it in it’s proper location on the Tone arm
(refer to illustration)
7. Remove the 45rpm adapter and place it in it’s new home located in the top right
corner of the record player.
ENEN
LISTENING TO RECORDS
1. Connect the external amplier device.
2. Place a record on the turntable, over the central spindle. Place the EP adapter
over the central spindle when playing 45 rpm records.
3. Set the Speed Selector to 33 or 45 rpm according to the record.
4. Release the tone arm clamp, and remove the needle cover from the stylus.
5. Lift the Tone arm with the Tone arm Lift Lever.
6. Move the tone arm to the beginning of the record, or to the start of a
particular track.
7. Gently lower the tone arm onto the record with the Tone arm Lift lever to
start playing.
8. When the record is nished the tone arm will automatically stop. To stop
manually, lift the tone arm from the record and return it to the rest.
NOTES:
• Remove the needle cover before you balance the tone arm.
• Hold tone arm whenever you make any adjustment or action so as to protect the
tone arm.
• Do not try to adjust the balance weight while playing a record as this could break
the needle and scratch the record.
• Re-secured the tone arm before transportation to protect the needle.
• Remove the balance weight before transportation to prevent damage or breakage
to the unit.
• Do not stop or turn the platter manually. Moving or jarring the turntable without
securing the Tone arm clamp could result in damage to the Tone arm.
ANTI-SKATING
Normally the anti-skating should be set to its minimum setting. Anti-skate com-
pensates for inward tracking forces that occur with certain pick-up when the stylus
nears the center of the record. If the turntable is experiencing excessive skipping
while nearing the center spindle, try increase the anti-skating in the increments
indicated on the dial. Start by adding an increment of 1, test its performance, then
increase it more, and so on.
NOTE: During adjusting the anti-skating knob, leave the tone arm and balance
weight alone to prevent damaging the stylus (needle).
ENEN
PHONO OUT OPERATION
1 .Switch the PRE-AMP OFF/ON SWITCH to OFF position.
2. Plug one end of the cable (included) into the PHONO OUT socket at the back of
the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the PHONO IN socket of your home
amplier device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on your amplier device.
HEADPHONE OPERATION
1. Connect a set of headphone (not included) on the Earphone socket on the front
panel of the unit.
NOTE: Never put on the headphone till you have plugged in the headphone plug
USB-PC Function, Audacity Software
Full instruction for the Audacity Software USB-PC Function can be found at:
http://www.audacityteam.org/download/
LOCATION OF CONTROLS
1. Spindle
2. Turntable
3. 45 Rpm adaptor
4. Balance weight
5. Anti-skating knob
6. Tone arm lift level
7. Tone arm rest holder
8. Tone arm
9. Stylus
10. Off / 33/45 knob
11. Needle cover
12. Earphone socket
13. Rca output sockets
14. Pre-amp off/on switch
15. Usb socket
16. Ac power socket
LISTENING TO RECORDS
1. Connect the external amplier device.
2. Place a record on the turntable, over the central spindle. Place the EP adapter
over the central spindle when playing 45 rpm records.
3. Set the Speed Selector to 33 or 45 rpm according to the record.
4. Release the tone arm clamp, and remove the needle cover from the stylus.
5. Lift the Tone arm with the Tone arm Lift Lever.
6. Move the tone arm to the beginning of the record, or to the start of a
particular track.
7. Gently lower the tone arm onto the record with the Tone arm Lift lever to
start playing.
8. When the record is nished the tone arm will automatically stop. To stop
manually, lift the tone arm from the record and return it to the rest.
NOTES:
• Remove the needle cover before you balance the tone arm.
• Hold tone arm whenever you make any adjustment or action so as to protect the
tone arm.
• Do not try to adjust the balance weight while playing a record as this could break
the needle and scratch the record.
• Re-secured the tone arm before transportation to protect the needle.
• Remove the balance weight before transportation to prevent damage or breakage
to the unit.
• Do not stop or turn the platter manually. Moving or jarring the turntable without
securing the Tone arm clamp could result in damage to the Tone arm.
ANTI-SKATING
Normally the anti-skating should be set to its minimum setting. Anti-skate com-
pensates for inward tracking forces that occur with certain pick-up when the stylus
nears the center of the record. If the turntable is experiencing excessive skipping
while nearing the center spindle, try increase the anti-skating in the increments
indicated on the dial. Start by adding an increment of 1, test its performance, then
increase it more, and so on.
NOTE: During adjusting the anti-skating knob, leave the tone arm and balance
weight alone to prevent damaging the stylus (needle).
ENEN
PHONO OUT OPERATION
1 .Switch the PRE-AMP OFF/ON SWITCH to OFF position.
2. Plug one end of the cable (included) into the PHONO OUT socket at the back of
the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the PHONO IN socket of your home
amplier device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on your amplier device.
HEADPHONE OPERATION
1. Connect a set of headphone (not included) on the Earphone socket on the front
panel of the unit.
NOTE: Never put on the headphone till you have plugged in the headphone plug
USB-PC Function, Audacity Software
Full instruction for the Audacity Software USB-PC Function can be found at:
http://www.audacityteam.org/download/
LOCATION OF CONTROLS
1. Spindle
2. Turntable
3. 45 Rpm adaptor
4. Balance weight
5. Anti-skating knob
6. Tone arm lift level
7. Tone arm rest holder
8. Tone arm
9. Stylus
10. Off / 33/45 knob
11. Needle cover
12. Earphone socket
13. Rca output sockets
14. Pre-amp off/on switch
15. Usb socket
16. Ac power socket
To reduce the risk of electric shock, do not remove cover or back.
No user serviceable parts inside. Refer servicing to qualied service personnel.
The light ash with arrowhead symbol, within an equilateral triangle, is
intended to alert user to the presence of non-insulated “dangerous volt-
age” within the product’s enclosure that may be of sufcient magnitude to
constitute risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
(see markings on the back of the unit.)
This unit operates on 100-240V. If the unit is not used for a long period of time,
remove the plug from the AC mains.
Ensure all connections are properly made before operating the unit.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated. Avoid placing it,
for example, close to curtains, on the carpet or in a built-in installation such
as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
IMPORTANT SAFETY INSTRUCTIONS
1. Follow and keep these instructions.
2. Heed all warnings.
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including ampliers) that produce heat.
7. Protect the power cord from being walked on or pinched particularly at plug,
convenience receptacles, and the point where they exit from the apparatus.
8. Only use attachments/accessories specied by the manufacturer.
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
10. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
TROUBLESHOOTING GUIDE
In case of trouble with the unit, please look through below and see if you can solve
the problem by yourself before calling your dealer.
THE WHOLE UNIT
PHONO PLAYER
WARNINGS AND STANDARD SAFETY INFO ADDED
Safety Precautions
WARNING: To reduce the risk of re or electric shock, do not expose this appliance
to rain or moisture.
CAUTION: Use of controls or adjustments or performance of procedures other than
those specied may result in hazardous radiation exposures.
CAUTION: RISK OF ELECTRIC SHOCKS - DO NOT OPEN!
PROBLEM
Power does not come on
when the power switch is
pressed.
CAUSE
Unit is unplugged.
SOLUTION
Connect the unit to the
AC power supply.
No sound
The working input does
not match the source
input.
Reselect a source.
The unit has no response
or could not reset.
External factors such
as ESD (Electro-static
discharge) affect the unit.
Remove the power cord
and all power supply de-
vices, then re-plug in the
unit after one minute.
PROBLEM
The sound is noisy when
playing the record.
CAUSE
The stylus is not placed
in the middle center.
SOLUTION
Replace the stylus which
is placed in the middle
center.
No sound
The working input does
not match the source
input.
Reselect a source.
The unit has no response
or could not reset.
External factors such
as ESD (Electro-static
discharge) affect the unit.
Remove the power cord
and all power supply de-
vices, then re-plug in the
unit after one minute.
ENEN
To reduce the risk of electric shock, do not remove cover or back.
No user serviceable parts inside. Refer servicing to qualied service personnel.
The light ash with arrowhead symbol, within an equilateral triangle, is
intended to alert user to the presence of non-insulated “dangerous volt-
age” within the product’s enclosure that may be of sufcient magnitude to
constitute risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
(see markings on the back of the unit.)
This unit operates on 100-240V. If the unit is not used for a long period of time,
remove the plug from the AC mains.
Ensure all connections are properly made before operating the unit.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated. Avoid placing it,
for example, close to curtains, on the carpet or in a built-in installation such
as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
IMPORTANT SAFETY INSTRUCTIONS
1. Follow and keep these instructions.
2. Heed all warnings.
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including ampliers) that produce heat.
7. Protect the power cord from being walked on or pinched particularly at plug,
convenience receptacles, and the point where they exit from the apparatus.
8. Only use attachments/accessories specied by the manufacturer.
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
10. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
TROUBLESHOOTING GUIDE
In case of trouble with the unit, please look through below and see if you can solve
the problem by yourself before calling your dealer.
THE WHOLE UNIT
PHONO PLAYER
WARNINGS AND STANDARD SAFETY INFO ADDED
Safety Precautions
WARNING: To reduce the risk of re or electric shock, do not expose this appliance
to rain or moisture.
CAUTION: Use of controls or adjustments or performance of procedures other than
those specied may result in hazardous radiation exposures.
CAUTION: RISK OF ELECTRIC SHOCKS - DO NOT OPEN!
PROBLEM
Power does not come on
when the power switch is
pressed.
CAUSE
Unit is unplugged.
SOLUTION
Connect the unit to the
AC power supply.
No sound
The working input does
not match the source
input.
Reselect a source.
The unit has no response
or could not reset.
External factors such
as ESD (Electro-static
discharge) affect the unit.
Remove the power cord
and all power supply de-
vices, then re-plug in the
unit after one minute.
PROBLEM
The sound is noisy when
playing the record.
CAUSE
The stylus is not placed
in the middle center.
SOLUTION
Replace the stylus which
is placed in the middle
center.
No sound
The working input does
not match the source
input.
Reselect a source.
The unit has no response
or could not reset.
External factors such
as ESD (Electro-static
discharge) affect the unit.
Remove the power cord
and all power supply de-
vices, then re-plug in the
unit after one minute.
ENEN
11. To reduce the risk of re or electric shock, do not expose this apparatus to rain
or moisture.
12. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
WEEE EXPLANATION
This marking indicates that this product should not be disposed with oth-
er household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
BATTERY DIRECTIVE
This symbol indicates that batteries must not be disposed of in the
domestic waste as they contain substances which can be damaging to
the environment and health.Please dispose of batteries in designated
collection points.
WARNING: The battery (in remote control) shall not be exposed to excessive heat
such as sunshine, re or the like.
WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.
This product contains a coin/button cell battery. If the coin/ button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to
death. Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
EN
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
BOB MARLEY ™
MARLEY ™
BOB MARLEY.COM
©Fifty-Six Hope Road Music Ltd.,©2011–2021. Right of Publicity and Persona Rights
Fifty-Six Hope Road Music Ltd.
Made in China. Fabriqué en Chine.
Distributed by
The House of Marley, LLC
3000 North Pontiac Trail, Commerce Township,MI 48390 USA
Imported into the UK by FKA Brands Ltd, Tonbridge, TN110GP, UK.
Imported into the EU by FKA Brands Ltd, 29 Earlsfort Terrace, Dublin 2. IE
Due to continuous product improvements, pictures on the carton may differ slightly from
the actual product. All other brands, product names, company names and trademarks are
property of their respective owners.
Étant donné que nous améliorons constamment nos produits, l'image sur le carton peut
différer légèrement du produit réel. Toutes autres marques de commerce et tous autres
noms commerciaux appartiennent à leurs propriétaires respectifs.
Customer Support:
HouseofMarley.com
EM-JT000
© 2021 House of Marley, LLC.
All Rights Reserved.
IB-EMJT000
11. To reduce the risk of re or electric shock, do not expose this apparatus to rain
or moisture.
12. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
WEEE EXPLANATION
This marking indicates that this product should not be disposed with oth-
er household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
BATTERY DIRECTIVE
This symbol indicates that batteries must not be disposed of in the
domestic waste as they contain substances which can be damaging to
the environment and health.Please dispose of batteries in designated
collection points.
WARNING: The battery (in remote control) shall not be exposed to excessive heat
such as sunshine, re or the like.
WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.
This product contains a coin/button cell battery. If the coin/ button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to
death. Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
EN
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
BOB MARLEY ™
MARLEY ™
BOB MARLEY.COM
©Fifty-Six Hope Road Music Ltd.,©2011–2021. Right of Publicity and Persona Rights
Fifty-Six Hope Road Music Ltd.
Made in China. Fabriqué en Chine.
Distributed by
The House of Marley, LLC
3000 North Pontiac Trail, Commerce Township,MI 48390 USA
Imported into the UK by FKA Brands Ltd, Tonbridge, TN110GP, UK.
Imported into the EU by FKA Brands Ltd, 29 Earlsfort Terrace, Dublin 2. IE
Due to continuous product improvements, pictures on the carton may differ slightly from
the actual product. All other brands, product names, company names and trademarks are
property of their respective owners.
Étant donné que nous améliorons constamment nos produits, l'image sur le carton peut
différer légèrement du produit réel. Toutes autres marques de commerce et tous autres
noms commerciaux appartiennent à leurs propriétaires respectifs.
Customer Support:
HouseofMarley.com
EM-JT000
© 2021 House of Marley, LLC.
All Rights Reserved.
IB-EMJT000
