Loading ...
Loading ...
Loading ...
9 10 11 12 13
CUTTING HAIR
The first time you cut the hair, cut only a small amount until you
become accustomed to how long each blade guard leaves the hair.
Always start by placing the largest blade guard on the trimmer, then
use shorter guards if a shorter length is desired.
Remember, between professional haircuts, the hair grows evenly all
over the head and a light trimming at the lower neck and sides may
be all that is needed to bring back that neat, well-groomed look.
For uniform cutting, allow the trimmer to cut its way through the
hair. Do not force it through at a faster rate.
1. Start by combing the hair so it falls into its natural direction.
2. Place the largest blade guard onto your trimmer and start by
trimming the sides from the bottom upwards. Hold the trimmer
lightly against the hair, with teeth of the blade guard pointing up
but flat against the head. Slowly lift the trimmer up and outward
through the hair, cutting only a small amount at a time.
Repeat around sides and back of head.
If you desire shorter hair, either change to a shorter blade guard or
apply more pressure and less lift away from head with the present
attachment.
This entire procedure requires practice, and it is always better to
leave too much hair the first few haircuts.
For the top of the head, you will give a fairly short cut if you use
the 1” blade guard. With the teeth flat against the head, slowly start
trimming from the front to the back. Again, it is better to leave the
hair longer the first few haircuts.
Loading ...
Loading ...
Loading ...