Loading ...
Loading ...
Loading ...
Before Setting Oven Controls
Arranging Oven Racks
AL WAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERA TING THE OVEN). Always use
oven mitts when using the oven.
Oven Vent Location
Removing and Replacing
(Models: 790.9010#)
The oven is vented through the rigth
rear coil element. When the oven is on,
warm air is released through the vent.
This venting is necessary for proper air
circulation in the oven and good baking
results. DO NOT block the vent(s).
Doing so may cause cooking failures,
fire or damage to the appliance.
Oven Vent Location
i
(Models: 790.9015#)
The oven isvented at the rJgth rear of
the cooktop. When the oven ison, warm
air is released through the vent. This
venting is necessary for proper air
circulation in the oven and good baking
results. DO NOT block the vent(s).
Doing so may cause cooking failures,
fire or damage to the appliance.
Oven Vent Location
Oven Racks
To remove an oven rack, pull the
rack forward until it stops. Lift up
front of rack and slide out.
To replace an oven rack, fit the
rack onto the guides on the oven
walls. Tilt the front of the rack
upward and slide the rack back into
place.
r"
Air Circulation in the Oven
If using multiple pans, stagger as shown. Ifusing one
pan, place in center of oven.
For best air circulation and baking results, center pans as
much as possible. Allow 2-4" (5-10 cm) around the
ustensil(s) for proper air circulation and be sure pans do
not touch each other or the door, sides and back of oven.
The hot air must circulate around pans in the oven for
even heat to reach all parts of the oven.
12
Loading ...
Loading ...
Loading ...