Loading ...
Loading ...
Loading ...
34
MAINTENANCE
Emptying the Water Collection
Tank
Condensed water is collected in the water
collection tank.
Empty the water collection tank after every use.
Not doing so will affect the drying performance
and can cause an operational error.
NOTE
• If the water collection tank is full, the
E
icon
glows and a chime will sound while the appliance
is operating. If this should occur, the water
collection tank needs to be emptied within the
next 30 minutes.
• When the condensed water is drained out
directly through the optional drain hose, there is
no need to empty the water collection tank.
1
Pull out the water collection tank.
2
Empty the water collection tank into the sink.
CAUTION
• Do not drink the condensed water or reuse it. It
could lead to health problems for people and
animals.
3
Refit it back into the appliance.
• Push in the water collection tank fully into
the appliance until it is in place.
4
Press the
Start/Pause
button to resume
operation.
Cleaning the Appliance
Periodically
Wiping the Moisture Sensor
This device senses the moisture level of the clothes
during operation, which means it must be cleaned
regularly to remove any build-up of lime scale on
the surface of the sensor.
Wipe the sensors inside the drum.
CAUTION
• Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a dry
rough acrylic sponge.
Cleaning the Cool Air Inlet Grill
Vacuum the cool air inlet grill 3 - 4 times a year to
make sure there is no build up of lint or dirt that
may cause improper air flow. Always unplug the
Loading ...
Loading ...
Loading ...