Loading ...
Loading ...
Loading ...
Page:
11
User Manual:
→ To open the dispenser, turn the cap to the "open" arrow, anti-clockwise, and lift out. (1)
→ Pour the rinse aid into the dispenser, being careful not to overll. (2)
→ Replace the cap by inserting it aligned with the "open" arrow and turn clockwise. (3)
Warning! Be careful not to overll the dispenser and wipe up any excess spilt with
a damp cloth. Any residual rinse aid can cause excess foaming during the
next wash.
ADJUSTING THE RINSE AID DISPENSER
→ The rinse aid dispenser has six or four settings. Always start with the dispenser set on
"4". If spots and poor drying are a problem, increase the amount of rinse aid dispensed
by removing the dispenser lid and rotating the dial to "5". If the dishes are still not drying
properly or are showing spots, adjust the dial to the next higher lever until your dishes
are spot-free. The recommended setting is "4". (Factory value is "4".)
→ Increase the dose of rinse aid if there are drops of water or lime spots on the dishes
after washing. Reduce it if there are sticky whitish stains on your dishes or a lm on your
glassware or cutlery.
Loading ...
Loading ...
Loading ...