Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE ____
FILLIN DATES /__ _'/_%_'_/_'£_#_"
AS YOU COMPLETE /_ _q,_/_O.O'£"_"
RE OLARSERV,CE E V'OEOAT S
Check Brake Operation I_ I_
Check Tire Pressure
Check Operator Presence and
T Interlock Systems I_
R Check for Loose Fasteners I_ I_s I_
A Sharpen/Replace Mower Blades 1_3
TO Lubrication Chart I_ If
0 Check Battery Level 1_4
R Clean Battery and Terminals tf If
Check Transaxle Cooling
Check V-Belts !_
Check Engine Oil Level If I_
Change Engine Oil (with oil filter) 1_1,2 I_
E Change Engine Oil (without oil filter) I_1,. If
a Clean Air Filter 11_2
G Clean Air Screen t_2
Inspect Muffler/Spark
Arrester
t/
E Replace Oil Filter (if equipped) 1_.2
Clean Engine Cooling Fins If 2
Replace Spark Plug I_ I_
Replace Air Filter Paper Cartridge 1_2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures,
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-Ibs, maximum,
Do not overtighten,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
@ Si
Zerk
LUBRmCATmON CHART
q} Tie Rod BaH Joints
-- @ Spindb
Zerk
@ Front Wheel
Bearing Zerk
@ Steering _
Sector Gear
Teeth
@ Front Wheel
}earing Zerk
_} Spray Silicone Lubriant (Move Boots to
Lubricate)
@ General Purpose Grease
@ Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the fife of the self-lubricating
bearings, if you feel they must be lubricated,
use only a dry, powdered graphite type lubricant
sparingly.
20
Loading ...
Loading ...
Loading ...