Loading ...
Loading ...
Loading ...
8
The following calculations assume the top of the panel is aligned
with the top of the adjacent cabinetry:
WIDTH OF THE PANEL
Measure
A (
the width between adjacent door/drawer fronts)
and write it in the rst box below, then complete the equation.
HEIGHT OF THE PANEL
Measure
B
and write it in the rst box below, then complete
the equation.
min. ⁄” (2mm) ventilation
gap with external venting
kit installed
min. ⁄” (2mm) ventilation gap with
external venting kit installed
WIDTH OF PANEL
HEIGHT
OF PANEL
A
B
A
B
clearance to
adjacent cabinet
front
(min. ⁄” (2 mm))
ventilation gap
(min. ⁄” (2 mm))
HEIGHT OF PANEL
- 2x
-
=
=
FRONT PANEL SPECIFICATIONS
⁄- ⁄” (16-20 mm) panel thickness
Maximum weight of panel: 20 lb (9 kg)
Adequately sealed to withstand moisture (122
O
F/ 50
O
C @ 80% RH).
Because of it being a hot and wet environment generally, the back
and sides of the panel should be completely sealed with a waterproof
vapour barrier (ie polyurethane) to prevent damage to the panel.
The back of the panel (including any integrated handle) should be
completely flush so that the seal between the panel and the rubber
trim is maintained.
INTEGRATED MODELS ONLY - CUSTOM FRONT PANEL CALCULATIONS
6
Note: when the top of the dishwasher has to be lower than the adjacent cabinetry,
the panel can be increased in height.
min. ⁄”(2mm) min. ⁄”(2mm)
min. ⁄”(2mm)
min. ⁄”(2mm)
WIDTH OF PANEL
(min. 23 ⁄” (596 mm))
Loading ...
Loading ...
Loading ...