Loading ...
Loading ...
Loading ...
23
PROBLEM SOLUTION
DISHES DIRTY/SUDS IN
DISHWASHER/CYCLE
NOT COMPLETE
If foam or suds are detected by the dishwasher sensing system, the dishwasher may not operate
SURSHUO\RUPD\QRWoOOZLWKZDWHU
6XGVFDQFRPHIURP
■ Using the incorrect type of detergent, such as dish detergent for hand washing dishes,
laundry detergent, or hand soap.
■ 1RWUHSODFLQJWKHULQVHDLGGLVSHQVHUFDSDIWHUoOOLQJRUUHoOOLQJWKHULQVHDLG
■ Using an excessive amount of dishwasher detergent.
■ Inadequate rinsing of detergent from dishes washed by hand before loading them into
the dishwasher.
Call for service.
If no water was present in the machine at any time during a heated wash cycle, the cycle
will end and the Complete indicator will not come on. See “Will Not Fill” in the
“Troubleshooting” section.
DID NOT SANITIZE ,IWKH6DQLWL]HGOLJKWLVEOLQNLQJWKHORDGLV127VDQLWL]HG7KHF\FOHZDVLQWHUUXSWHGLQWKH
oQDOULQVHRUWKHWHPSHUDWXUHIRU\RXUZDWHUKHDWHULVVHWWRRORZ6HW\RXUZDWHUKHDWHUWR
120ºF (49°C).
DAMAGE TO DISHWARE ,PSURSHUORDGLQJFDQFDXVHGLVKHVWREHFRPHFKLSSHGRUGDPDJHG6HHVSHFLoFORDGLQJ
instructions within this guide.)
BLINKING LIGHTS Blinking indicators will occur when the cycle is paused or when the cycle has been
LQWHUUXSWHGE\RSHQLQJWKHGRRU,IWKH6WDUW5HVXPHOLJKWLVEOLQNLQJFORVHWKHGRRU
DQGSUHVV67$575(680(
If the Complete light or any other lights are blinking and the dishwasher will not run, call
for service.
CLOUDY OR SPOTTED
DISHWARE (AND HARD
WATER SOLUTION)
Add or adjust the amount of liquid rinse aid for better drying and to reduce spotting. See the
“Detergent and Rinse Aid” section.
Use the correct amount of detergent.
&RQoUPWKDWWKHFORXGLQHVVLVUHPRYDEOHE\VRDNLQJWKHLWHPLQZKLWHYLQHJDUIRUPLQXWHV,I
the cloudiness disappears, it is due to hard water. Adjust the amount of detergent and rinse aid.
See “Hard Water (White Residue on Dishwasher Interior or Glassware)” in the “Troubleshooting”
section. If it does not come clear, it is due to etching (see below).
Be sure the incoming water temperature is set at 120°F (49°C).
Try using the Hi Temp and Sani Rinse options.
To remove spotting, run a vinegar rinse through the dishwasher.
■ :DVKDQGULQVHWKHDçHFWHGGLVKZDUHDQGORDGLQWRGLVKZDVKHU5HPRYHDOOVLOYHUZDUH
and metal items. Put 2 cups (500 mL) of white vinegar in a glass measuring cup in the
ORZHUUDFN5XQD1RUPDO:DVKF\FOHZLWKWKH7XUER+HDW'U\RSWLRQWXUQHGRç1R
detergent is needed.
ETCHING (PERMANENT
CLOUDINESS)
7KLVLVDQHURVLRQRIWKHVXUIDFHRIWKHJODVVZDUHDQGFDQEHFDXVHGE\DFRPELQDWLRQRI
water that is too hot, from using too much detergent with soft water or by pre-washing.
Detergent needs food soil to act upon. If etching has occurred, the glassware is permanently
damaged. To avoid further etching, adjust the detergent amount to match the water hardness,
stop pre-washing, and use water heating options only when incoming water temperature is
below 120°F (49°C).
LEAKING WATER Be sure dishwasher has been installed properly and is level.
6XGVFDQFDXVHWKHGLVKZDVKHUWRRYHUpRZ0HDVXUHWKHGHWHUJHQWDFFXUDWHO\DQGXVHRQO\
detergents designed for use in a dishwasher. Less detergent is needed in soft water. Try another
brand of detergent if sudsing continues.
To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached and
DYRLGRYHUoOOLQJ
TUB IS DISCOLORED High iron content in the water can discolor the tub.
Tomato-based foods can discolor the tub or dishware. Large amounts of tomato-based
foods should be removed from the dishes before loading.
A citrus-based cleaner can be used to clean.
Loading ...
Loading ...
Loading ...