Loading ...
Loading ...
Loading ...
56 - INSTALLATION 91477A150/B
Levelling the appliance
The appliance must be level on the floor in order
to ensure greater stability:
• Screw or unscrew the feet at the bottom until
the appliance is stable and level on the
floor.
Assembling the upstand
The upstand must always be positioned and
secured correctly on the appliance.
1. Loosen the 6 screws (A) on the back of the
hob and unscrew the two screws (B)
underneath.
2. Place the upstand on the hob. Align the 6
bottom slots of the upstand with the 6 screws
on the back of the hob that were previously
loosened.
3. Tighten the 6 screws on the back of the hob
and the 2 screws underneath.
Mounting the plinth
The plinth must always be positioned and
secured correctly on the appliance.
1. Open the drawer
2. Place the plinth in the front bottom part of the
appliance.
3. Screw the four side screws to fasten the
plinth to the appliance.
4. Cover the holes of the plinth with the plugs
provided.
Fastening to the wall
The symbols above indicate the danger if the
anti-tip are not installed devices and the
importance of their correct installation.
The upstand provided is an integral part
of the product. It must be fastened to the
appliance prior to installation.
A
B
B
A
The plinth provided is an integral part of
the product; it must be fastened to the
appliance prior to installation.
The anti-tip devices must be installed in
order to prevent the appliance from
tipping over.
Loading ...
Loading ...
Loading ...