Kenmore 11023102311 washer

User Manual - Page 10

For 11023102311.

PDF File Manual, 52 pages, Download pdf file

Loading ...
Loading ...
Loading ...
7'. Select LOAD SiZE
Medium
@
SmaU
Extra ® _ _ , Deep
Load Size
Select the load size setting most suitable for your load. Extra
Small will add a low amount of water for smaller loads and
Deep Fill or Large will add the most amount of water for large
or bulky loads, items need to move freely.
8. Select WASH TEMP
Cool Warm
@ @
!i
Wash Ternp
After selecting the load size, select the Wash Temp by turning
knob to desired temperature. Ail rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
.or i
Some cold water is added to save Whites and pastels
energy. This may be cooler than Durable garments
your hot water heater setting.
Heavy
soils
\tVa r m zzl
Some cold water may be added, ::iBright colors
so this will be cooler than what ::iModerate to light soils
your previous washer provided.
Cool
Warm water is added to assist ::iColors that bleed or
in soil removal and to help fade
dissolve detergents.
::iLight soils
ii
cold
Warm water may be added to ::iDark colors that bleed
assist in soil removal and to help ::ior fade
dissolve
detergents.
ili Light soils
9. Select options (on some models)
Two
Rinses
@ @
Rinse £(
)
.... .................i ....
One Rinse
w/SOFTENER
Two Rinses
w/SOFTENER
Rinse
Select the desired cycle options. If you are using fabric softener,
be sure to select one of the Rinse with Softener options.
f|O._ Press START/PAUSE/Unlock Lid
to begin wash cycle
_ START
PAUSE
UNLOCK LID
CANCEL
HOLD 3 SEC
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. When the cycle has finished, the Cycle Complete
status light will light. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and rusting of metal
hooks, zippers, and snaps.
Unlocking the ild to add garments
if you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/Unlock Lid; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
PAUSE/Unlock Lid again to restart the cycle.
If lid Js left open for more than 10 minutes, the water win pump
out automatically.
10
Loading ...
Loading ...
Loading ...