Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
TROUBLE! MATERIAL RUNS OR DRIPS.
WHAT’S WRONG? WHAT TO DO…
Spraying too much material.
R
educe paint flow by turning material adjust
knob.
Spraying too slowly. Increase speed of application.
Spraying too close. Increase distance from surface.
Viscosity too thin. Check dilution recommendation.
TROUBLE! MATERIAL DRIPS FROM NOZZLE
WHAT’S WRONG? WHAT TO DO…
Nozzle loose Screw nozzle tight
Nozzle breaks Change
Y-type seal ring of nozzle breaks Change
Material accumulated /clog inside nozzle Clean
TROUBLE! TOO MUCH OVER SPRAY.
WHAT’S WRONG? WHAT TO DO…
Sprayer too far from surface. Reduce distance to surface.
Too much material being sprayed.
TROUBLE! LITTLE OR NO MATERIAL BEING RELEASED.
WHAT’S WRONG? WHAT TO DO…
Spray nozzle/tip clogged. Clean nozzles.
Y-type seal ring of nozzle missing Add seal ring to nozzle and assemble in place
Pickup tube loose or clogged. Check tube.
Container loose Screw container tightly in place
Container lid loosen
Screw container lid tight in place
Air hose split or disconnected Check air hose
Flow control knob setting too low.
Air inlet blocked
Material too thick. Thin material per manufacturer
recommendation.
Loading ...
Loading ...