Loading ...
Loading ...
Loading ...
Page 14 of 24 801599 - HydroTap BC, BCHA, AIO, User Guide - July 2015 - V2.00
LCD Screen operation - Section D
5 - Lux Sensor Calibration
LCD Screen operation - Section C
NOTE: Conduct calibration under normal light conditions
1. Press [MENU] button for main menu.
2. Press [Install] button.
3. Press [Lux Sensor Calibration]
button.
4. The lights on the Tap head will flash
to confirm calibration.
5. Check for correct tap operation by
selecting ‘Lux Sensor-> OFF’. When the room is darkened (below the
calibrated light level), the tap lights will turn OFF after aprox 30 seconds.
This section is reserved for service technicians only
Note: In Australia call a licensed electrician, plumber,or Zip office on
1800-638-633, for assistance, service, spare parts, or enquiries.
D
Service
Loading ...
Loading ...
Loading ...