Frigidaire FTF1240FS0 washer

User Manual - Page 2

For FTF1240FS0.

PDF File Manual, 4 pages, Download pdf file

Loading ...
iiii
Cycle Selection
For best results, follow the fabric care label directions
on items to be washed.
Whites/Regular Cycle
Up to 18 minutes of reversing tumble action for most
fabrics. Three rinses, two spins, a pause and a brief
tumble complete the cycle. Select NORMAL or FAST
Final Spin asdesired.
HeavyWash provides up to 18 minutes of
reversing tumble action for heavily soiled fabrics.
Wash provides up to 13 minutes of reversing
tumble action for normally soiled fabrics.
Light Wash provides up to 6 minutes of reversing
tumble action for lightly soiled fabrics.
Short Wash Cycle
Savestime and water. Up to 6 minutes of reversing
tumble action for very lightly soiled fabrics. Two
rinses, two spins, a pause and a brief tumble
complete the cycle. Extra Rinse is not an option with
this water conserving cycle. Select NORMAL or FAST
Final Spin as desired for this cycle.
Colors/Perm Press Cycle
Up to 13 minutes of reversing tumble action for
cottons and blends with a no-iron finish. Three rinses,
two spins, a pause and a brief tumble complete the
cycle. Select NORMAL or FAST Final Spin asdesired
for this cycle.
Wash provides up to 13 minutes of reversing
tumble action for heavily soiled fabrics.
Extra Care provides up to 6 minutes of reversing
tumble action for lightly soiled fabrics.
Controls
Always follow instructions on fabric care labels.
Note: There is no need to select a water level
because the washer automatically adjusts the
water level to the type and size of wash load.
TEMPERATURES- This determines water temperatures
for washing and rinsing. For example, the Warm/Cold
setting provides a warm water wash and a cold water
final rinse.
Note: Detergents are not aseffective at wash water
temperatures below 65% (18.3°C).
Precision Temp Control
The normal temperature of warm and cold wash water
can be affected by the hot water heater setting and
seasonally low ground water temperatures in some
geographic areas. Sincedetergents work best in wash
water at a minimum of 65° F,select a Precision Temp
Controlto regulate the temperature of the warm and
cold wash water in any cycle.
Wash water in the Warm/Cold and Warm/Warm
settings is regulated to approximately 82° F. and the
wash water in the Cold/Cold setting is regulated to
approximately 70° F. Rinsewater temperatures are not
regulated.
The following chart suggests wash/rinse temperatures
for basic fabric types.
Fabric Type
Wash/Rinse
Tempera ture
Heavily soiled white/colorfast
cotton, perm press
Hot/Cold
Normally soiled white/colorfast Warm/Cold
cotton, perm press
Lightly soiled/noncolorfast
fabrics, knits, delicates,
hand washables
Cold/Cold
Washable woolens Warm/A/arm
CYCLE SIGNAL - A signal will sound at the end of the
cycle when the Cycle Signal isset to ON. This can be
turned off by selecting OFFon the Cycle Signal switch.
EXTRA RINSE - Use Extra Rinsewhen additional
rinsing isdesired to remove excessdirt and detergent
from heavily soiled loads.
Select Extra Rinse YES to automatically include
an extra rinse in Whites/Regular, Colors/Perm
Press,or Delicates cycle.
Select Extra Rinse NO to conserve water when
an extra rinse is not desired.
FINAL SPIN - There are two final spin speed options
available for each cycle. Note: The speeds will vary
from cycle to cycle. For example, Regular Fast spin
speed ismuch faster than Delicate Fast spin speed.
NORMAL isrecommended for most loads.
FAST provides a faster spin speed to increase
water extraction and decrease drying time.
Knits and Delicates Cycle
Up to 10 minutes of gentle tumble action for the
gentle care of knit, delicate and hand washable
items. Two rinses and two spins complete the cycle.
Select NORMAL or FAST Final Spin asdesired for this
cycle.
When the door is closed, the Door Lock Indicator
lights up when the cycle selector knob is pulled out,
and turns off at the end of the cycle.
P/N 137009100 (0710)
Loading ...
Loading ...