Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
FILL IN DATES
ASYOOCOMPLETE
.....
REGULARSERV,CE
,_/£-q'_/Y£-_ S E R V IC E DATES
Check Operator Presence and
RT Interlock Systems
Check for Loose Fasteners _7
Sharpen/Replace Mower Blades !4
Lubrication Chart
T Check Battery Level
R Clean Battery and Terminals
Check Transexle Cooling
Adjust Blade Belt(s) Tension _5
Adjust Motion Drive Bett(s) Tension _5
Check Engine Oil Level _
Change Engine Oil _1,2,3
NE Clean Air Filter 11_2
Clean Air Screen _1_2
Inspect Muffler/Spark Arrester
Replace Oil Filter (If equipped) _1,2
N Clean Engine Cooling Fins 1_2
Replace Spark Plug I_' I_
Replace Air Filter Paper Cartridge
Replace Fuel Filter
I - Change more often when operating under a heavy load or in high ambient temperatures. 5 =If equipped with adjustable system.
2 - Service more often when operating in dirty or dusty conditions. 6 - Not required if equipped with maintenance-free battery.
3 - If equipped with oit filter, change oil every 50 hours. 7 - Tighten front axte pivot bolt to 35 ft.dbs, maximum.
4 - Replace blades more often when mowing in sandy soil. DO not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain you rtractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
• Once a year you should replace the spark plug, clean or
replace air filter, and check blades and belts for wear. A
new spark plug and clean air filter assure proper air-fuel
mixture and help you rengine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Checktire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
LUBRICATION CHART
-4=
i
(_SPINDLE
ZERK
(_FRONT WHEEL
BEARING ZERK
_ _ENGINE
16
i
I
i
I
i i i
Q1)GENERAL PURPOSE GREASE
_REFER TO CUSTOMER RESPONSIBILITIES "ENGINE"
SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI-
CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
DERED GRAPHITE TYPE LUBRICANT SPARINGLY.
Loading ...
Loading ...
Loading ...