Loading ...
Loading ...
Loading ...
Check Brake Operation
Check Tire Pressure _1
Check Operator Presence and
T Interlock Systems If
R Chock for Loose Fasteners V w
A Sharpen/Replace Mower Blades
T Lubrication Chart
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Check V-Be]ts
Check Engine Oil Level If
Change Engine Oil (with oil filter)
E Change Engine Oil (without oil filter)
N Clean Air Filtee
G Clean Air Screen
NI Inspect Muffler/Spark Arresler
E Replace Oil Filter (If equipped)
Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 ° Change more often when operating under a heavy toad or
in high ambient temperatures.
2 - Service more often when operating indirty ordusty conditions.
MAINTENANCE SCHEDULE ,_"__ ..,_/_/,,_/_ /_./'
F,LL,.O*TE
AS YOU COMPLETE /_____R-_._b R.4.,)_ _..j_ ,_,a_ ;a _/_._.
REGU LARSE RVICE _'__///_#" SE RVIC E DATES
I
V', I,,"
V"
V"
I/
V',
V*tr 2 _d_
L/
v'
I,/2 I
v'P I
3 - Replace blades more olten when mowing in sandy soil.
4 - Not required if equipped with mainmnancg-free battery.
5 - Tighten front axle pivot bolt to 35 tt.-Ibs, maximum,
DO not ovedlghten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer•
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation•
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper opera-
tion.
5. Check for loose fasteners.
LUBRICATION CHART
O Spindle _ f'_ ,r_ Q Spindle
Zerk ".,_'1""tr I1_'_ Zerk
(_Front W_/ --i (_Front Wheel
Beadng _ ....... j ,_ Bearing Zerk
Zerk /7 ,:,. ::
i
• / '" ° "S (_ '
@Engine _-. ,
i i t
t i *
(i) General Purpose Grease
_) REFER TO Maintenance "ENGINE" SECTION
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.
18
Loading ...
Loading ...
Loading ...