Loading ...
CAUTION: FOR PERSONAL SAFETY, STACKED UNITS
MUST BE FASTENED SECURELY TO WALL.
STEP 1
Attach two chains using Phillips head screws to each end of
upper unit cabinet.
STEP 2
Locate two wall studs behind desired operating _ocation of
stacked units.
NOTE: For wall studs not appropriately spaced, see section
for Alternate Method for installation of Wall Hooks.
STEP 3
Screw two wall hooks into two wall studs (same height as
chain connections on cabinet of upper unit). Both chains
should pul! straight back to wall studs or angle outward.
NEITHER chain should angle inward.
NOTE: The final construction must withstand a pull of
200 Ibs.
STEP4
Connect both dryers to gas supply.
(See GAS CONNECTION iNFOR:MATiON of this instruction.)
STEP 5
Connect both dryers to power supply. (See ELECTRICAL
CONNECTION INFORMATION section of this instruction,)
STEP 6
Connect both dryers to external exhaust. (See EXHAUST
iNFORMATION section of this instruction.)
STEP 7
Hook both chains from upper unit to appropriate walt hooks
taking up any slack.
STEP 8
Adjust all 4 levelling legs. Dryer must be levelled and rest
firmly on alt 4 levelling legs.
REAR VIEW
ATTACH CHAINS HERE
o
! '
/
SIDE VIEW
4 LEVELLING LEGS
Alternate Method for Installation of Wall Hooks
STEP 1
if wall studs are not correctly spaced or centered behind upper unit, it
may be necessary, to attach a horizontal 2" x 4" board to the existing
wall.
STEP 2
Attach wall hooks in approximate position of two chains of upper unit
so each chain pulls straight back to wall.
NOTE: if wall is concrete or b!ock_ ddll holes and use appropriate wall
anchors. The final construction must withstand a puil of 200 Ibs,
WALL STUDS
ffl
WALL HOOKS
Loading ...
Loading ...
Loading ...