Loading ...
Loading ...
Loading ...
www.napoleongrills.com
11
EN
WARNING! Hose (oponal): Check for abrasions, melng, cuts, and cracks in the hose. If any
of these condions exist, do not use the gas grill. Have the part replaced by your Napoleon Gas Grill
dealer or qualied gas installer.
WARNING! When reinstalling
the burner aer cleaning it is very
important that the valve/orice
enters the burner tube before lighng
your gas grill. If the valve is not inside
the burner tube a re or explosion
could occur.
or orange ame or cause a re (ashback) at the air shuer underneath the control panel. To clean the
inside of the burner, it must be removed from the gas grill: Remove the screw (s) that aach the cross
light bracket and the burner to the base. Slide the burner back and upwards to remove. Cleaning: Use
a exible venturi tube brush to clean the inside of the burner. Shake any loose debris from the burner
through the gas inlet. Check the burner ports and valve orices for blockages. Burner ports can close over
me due to cooking debris and corrosion; use an opened paperclip to clean them. The ports are easier to
clean if the burner is removed from the grill, but it can also be done with the burner installed.
CAUTION! Take care not to enlarge the holes.
Ensure the insect screen is clean, ght, and free of any lint or other debris.
Reinstallaon: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing. Replace cross light bracket and ghten screws to complete reinstallaon.
Loading ...
Loading ...
Loading ...