Loading ...
Loading ...
Loading ...
8 | Wolf Customer Care 800.222.7820
Installation
Place the oven in the opening and slide back partially.
Guide the power cord through the opening of the adjacent
cabinet and slide the oven back fully. Verify the power cord
is not trapped between the oven and cabinet wall.
Locate the mounting holes on the oven side trim, two on
each side. Drill ⁄" pilot holes. Use the provided mount-
ing screws to secure the oven to cabinetry. Refer to the
illustration below.
To avoid interference, a 90° door stop may be required for
any appliance or cabinet door installed next to the oven.
CAUTION
Failure to install the mounting screws may cause the
oven to tip forward during use.
MOUNTING
HOLES
Oven installation
Installation
Preparation
Before moving the oven, protect any finished flooring and
secure the oven door closed to prevent damage.
Use an appliance dolly to move the unit near the opening.
Remove and recycle packing materials. Do not lift or carry
the oven by the door handle.
OVEN DOOR REMOVAL
To remove, open the oven door completely. Rotate both
hinge latches forward to the open position. Close the door
to the at-rest position, then lift up and out. Refer to the
illustrations below.
To reinstall, insert the door hinges into the frame openings.
Open the oven door completely and rotate both hinge
latches back to the closed position.
OPEN
POSITION
CLOSED
POSITION
Oven door hinge latch
Door at-rest position
Loading ...
Loading ...
Loading ...