can set clean time ; Press the right “ON/OFF”button to start cleaning and the
Working Indication Light will be on. Left “TEMP+”and “TEMP-”is
temperature set button , Press them can set heat temperature ; Ifyou want heat,
please press the left“ON/OFF”button,and the Working Indication Light will be
on.
ADJUST:The right knob will be Rotating around, you can adjust to the power. e) During
cleaning, the“ZiZi” noise is normal.
f)After cleaning time over, or press“ON/OFF”button to stop.For another cleaning cycle, just
repeat above process.
g)When cleaning is over,unplug the unit.Open the cover,take the cleaned article out and drain
the water.
E、OUR WAYS OF CLEANING
a)GENERAL CLEANING:Use only plain water for general cleaning.The water should merge
the item to be cleaned
b) ENHANCED CLEANING: When the item is smeary of extraordinary dirty. Please add about
5-10ml of detergent into water to enhance cleaning result.
c)CLEANING BY PARTS:For large items,partly cleaning as shown.
F
、
USER MAINTENANCE
a) Unplug and empty the unit after using. (Do not keep water in the tank for a long time)
b) Wipe the tank and housing with dry towel.(Do not wash the unit with water to avoid
electric shock.)
c)Keep in cool and dry place.
G、DIRT ELIMINATION PROCESS THROUGH ULTRASONIC TECHNOLOGY
a) Many tiny bubbles are generated under the action of ultrasonic.
b) Bubbles are imploded constantly under the action of ultrasonic to impact the surface of the
item.
c)The impact splits up the dirt into many granules and separates them from the surface of the
item,the granules then come into water.
ULTRASONIC CLEANER
MINIATURE SERIES
MANUAL
Loading ...
Loading ...
