Loading ...
Loading ...
Loading ...
26 USNG YOUR WASHING MACHINE
Sef fhe drying lime, Dry
[_ rying options are easily selected with the
DRY button. For the most even drying, make
sure all articles in the clothes load are similar
in material and thickness. Do not overload
the washer by placing too many articles into the drum.
Items must be able to tumble freely. If you open the
door and remove the load before the washer has
finished the DRY cycle, remember to press the START/
PAUSE button.
By pressing the DRY button, you can select:
1 LOW TEMP - For delicate fabrics
2 DAMP - For damp drying fabrics
3 NORMAL- For general drying
4 MORE - For heavier fabrics
5 30/60/90/120 - For timed drying
_@ NOTE
• The capacity of the machine for washing clothes is
twice as much as when drying clothes. If the machine
is to be used to dry a load, then the wash load must
be reduced by half for effective drying performance.
If a full load is washed, remove half the clothes prior
to starting the dry cycle.
• The Wrinkle Care feature is set automatically when
the drying cycle is complete and cannot be disabled.
• This feature will help prevent wrinkling of the clothes
if they are not removed promptly when the dry cycle
ends. When the drying cycle is completed, L-d [COOL
DOWN] is displayed on the Multi display. The COOL
DOWN is set automatically when a drying cycle is
complete. When you don't remove a load of clothes
from the dryer as soon as it stops, wrinkles can form.
The COOL DOWN function periodically tumbles,
rearranges and fluffs the load to avoid wrinkles
without heat for up to 4 hours. The LLnmessage will
continue to display until the clothes are removed or
the Start/Pause button is pressed.
J
Drying Guide-Automatic Dry
Electronic sensors measure the temperature of the
exhaust to increase or decrease the drying temperature
for faster reaction time and tighter temperature control.
Recommended DRY settings by fabric type:
a) Perm Press- LOWTEMP
b) If clothes are to be ironed - DAMP
c) Cotton/rowels - NORMAL
d) Diapers - MORE
_-@ NOTE
i
, • On Automatic Dry settings, the estimated drying
', time may vary from the actual drying time. The
', type of fabric, size of the load, and the selected
i dryness level affect drying time.
'\.... J
Drying Guide-Timed Dry
• Press the Dry button repeatedly to select the drying
time in 30 minute increments:
30-60-90-120 minutes.
• Timed dry can last up to 120 min. When selecting Dry
only, drying will start after the final Spin cycle.
• Drying times can vary greatly depending on
dampness, room temperature, and type of fabric. You
may need to add additional time. Your own experience
will be your best guide.
Drying Tips
Woolen Articles
Do not tumble dry woolen articles. Pull them to their
original shape and dry them flat.
Woven and Loopknit Materials
• Some woven and Ioopknit materials may shrink
when dried.
• Always stretch them out immediately after drying.
Permanent Press and Synthetics
• Do not overload your dryer.
• Take out permanent press articles as soon as the
dryer stops to reduce wrinkles.
Fiber or Leather Materials
Always check the manufacturer's instructions.
Baby Clothes and Night Gowns
Always check the manufacturer's instructions.
Rubber and Plastics
Do not dry any items made from or containing
rubber or plastics, such as:
a) Aprons, bibs, chair covers
b) Curtains and table cloths
c) Bathmats
Fiberglass
Do not dry fiberglass articles in your dryer. Glass
particles left in the washer could be picked up by
your clothes the next time you use the washer and
irritate your skin.
Prewashing, Pre Wash
Pre-wash for 16 minutes when clothes are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
1 Press the Power button and turn the cycle selector
knob in either direction to select the desired cycle.
2 Press the Pre Wash button.
- The indicator light will turn on.
3 You can now modify other cycle settings and add
options (see pages 25-28), or proceed to step 4 to
begin the cycle.
4 Press the Start/Pause button.
Rinse, drain and spin only, Rir_se+Spin
Use this cycle to rinse detergent from the load.
1 Press the Power button and turn the cycle selector
knob in either direction to select the desired cycle.
2 Press the Rinse+Spin button.
3 Press the Spin Speed button repeatedly to set the
spin speed.
- The indicator light for the selected spin speed will
turn on.
4 Press the Start/Pause button.
Loading ...
Loading ...
Loading ...