Loading ...
Loading ...
Loading ...
Vacuum Sealing Accessories
8
Connect Accessory Hose to both accessory
port on appliance and port on accessory
Press Vacuum & Seal Button
Vacuum sealing zipper bags
For Containers
1. Prepare container according to FoodSaver
®
Accessory Guidelines
(see manual that comes
with your Accessory Kit).
2. Insert one end of Accessory Hose into Accessory
Port on appliance. Press the Handheld Sealer
over the accessory.
NOTE: For Containers and Bottle stoppers without
green oval buttons on lid, remove the clear
bottom portion of Handheld Sealer from top
handle. Insert the green tip into the hole on top of
the container lid or into the bottle stopper. Twist
the green tip of the hose while inserting to ensure
a tight fit.
3. Close lid, rotate Latch to OPERATE position,
press Vacuum & Seal Button.
4. When motor and Indicator Light turn off, vacuum
process is complete. Note that the appliance
will still go through sealing cycle even when
vacuuming an accessory. You will hear Motor shut
off and then the sealing cycle will begin.
5. Gently twist and remove Handheld Sealer from
accessory and appliance.
6. To test vacuum, simply tug on accessory lid.
It should not move.
NOTE: For important tips on using accessories with
different foods, please refer to the FoodSaver
®
Storage Guide on page 14.
For Zipper bags
1. To use Handheld sealer with Vacuum Zipper
Bags, lay bag flat with grey circle facing upwards.
Squeeze air out of the bag and seal closed
completely.
2. Place Handheld Sealer over grey circle on bag and
press Vacuum & Seal button.
Green tip to insert into the
port on containers/
bottle stoppers
Loading ...
Loading ...
Loading ...