Loading ...
Loading ...
Loading ...
13
11. First, insert the door lower axis
into the hole in the base panel.
Next, push down the door upper
spring axis and let go of the spring
when it is pointed to the hole in the
horizontal beam. (Note: You may
need to add 1 or 2 washers
18*6.4*1 on the bottom pin so
the door will close evenly)
ALMOST FINISHED!!
12. Put the oven assembly on the
stand-top panel. Use screw
M6*12×4 pcs to fasten the oven
onto the stand. (Note: These
screws can be tightened at this
time)
Loading ...
Loading ...
Loading ...