Loading ...
Loading ...
Loading ...
13
OPERATING INSTRUCTIONS
POWER FUNCTION
• Press the POWER ICON to turn on the main power to the unit ON or OFF.
• When the unit is powered ON, the unit will only detect the ambient temperature after the fan and heater ON for 3
minutes. The control panel will display the heater setting to indicate the unit is power ON or OFF.
• Functions stored in memory will resume at the last setting.
• If the last temperature setting is OFF, the unit will automatically set the temperature to ambient temperature when the
unit is power ON next time.
• When the unit is powered OFF, the fan will continue to blow for a 60 second cool-down cycle prior to shutting down (a
countdown will be displayed). After 60 seconds, two dash line (- -) will be displayed.
CONTROLS AND DISPLAY
The control panel will display two dash line (- -) when the unit power switch is turned
ON. Whichever control icon you press will display the current setting of the
corresponding function. Press the control icon again to adjust the setting. Following
adjustment of any setting(s), the unit will resume to display the heater setting after 5
seconds.
HEATER FUNCTION
• Press the HEATER ICON to display the current heater setting.
• Press the HEATER ICON again to scroll down through the heater settings.
Note: Long-hold the icon to quickly scroll through settings.
• Set the heater to “HI” (High) to have the heater run continually.
• Set the heater to “OF” (OFF) to use the ame functions without heat.
• This heater has a thermostat sensor to control the ambient temperature in the surrounding area of the replace. The
heater will cycle ON and OFF to maintain the selected temperature. The thermostat setting range is 82°F (32°C) to
65°F (15°C).
Note: This may not exactly match the room thermostat reading as their sensors are located in different areas.
FLAME SPEED FUNCTION
• Press the FLAME SPEED ICON to display the current ame speed setting.
• Press the FLAME SPEED ICON again to cycle through the ame speed settings: 5, 4, 3, 2, and 1.
FLAME BRIGHTNESS FUNCTION
• Press the FLAME BRIGHTNESS ICON to display the current ame brightness setting
• Press the FLAME BRIGHTNESS ICON again to cycle through the ame brightness settings: 5, 4, 3, 2, 1, and oF (OFF).
• When the ame brightness setting is set to OF (OFF), then the ame speed will also OFF together.
Loading ...
Loading ...
Loading ...