Loading ...
Loading ...
Loading ...
-
Always trim in the direction of the teeth
of the precision trimming comb, making
sure that the flat part of the comb is in
full contact with the skin for an even
trimming result (Fig. 14).
-
Since all hairs do not grow in the same
direction, you may want to try different
trimming directions (i.e. upwards,
downwards, or across). Practice is best
for optimum results.
-
Make sure to always move the product
against the grain.
-
Trimming is easier when the skin and hair
are dry.
1 Place the front part of the comb onto the
blade and push the projection at the
back of the comb into the product (‘click’)
(Fig. 15).
2 Turn the hair length setting wheel to
select the desired hair length setting (Fig.
16). The settings on the wheel
correspond to the remaining hair length
after trimming.
3 Switch on the product (Fig. 7).
4 Place the comb onto the skin and move
the product upwards slowly, against the
grain (Fig. 17).
5 Switch off and clean the product after
each use (see 'Cleaning').
6 To remove the comb, pull the back part
off the product and then slide the comb
off the blade (Fig. 18).
Cleaning
Clean the product after every use.
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as
gasoline or acetone to clean the product.
Do not tap the product or blade against a
surface to remove hairs and water as this
may cause damage to the product and
blade (Fig. 20). If the blade is damaged,
replace immediately.
Never dry the blade with a towel or tissue,
as this may cause damage.
Cleaning the product
1 Switch off the product.
2 Remove the comb from the blade (Fig.
18).
3 Blow off any hairs that have accumulated
on the blade and/or comb (Fig. 19).
4 Switch on the product approx. 15
seconds and rinse the blade with
lukewarm water (Fig. 19).
5 Rinse the comb for approx. 15 seconds
with lukewarm water (Fig. 21).
6 Carefully shake off excess water and let
all parts air dry completely.
Note: The blade is fragile. Handle it
carefully. Replace the blade immediately if
it is damaged.
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
Always put the protection cap on the blade
to protect the blade from damage during
travel or storage.
We advise you to let the product and its
attachments dry completely before you
store them for the next use.
1 Place the protection cap onto the edge
of the blade (Fig. 22).
2 Close the protection cap (Fig. 23).
-
Charge the battery before storing the
product for an extended period.
-
Be sure the product is switched off.
Remove the power cord from power
outlet and the product before storing it in
a safe, dry location where it will not be
crushed, banged, or subject to damage.
-
Do not wrap cord around the product
when storing.
-
Store cord and other accessories in a
safe location where these will not be cut
or damaged.
-
Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
Replacement
Blade wear indicator
For optimal cutting and gliding
performance, replace the blade every 4
Loading ...
Loading ...