Loading ...
Loading ...
Loading ...
(39,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
driver’s door is opened, the registered
memory position can be retrieved even
if the ignition switch is in the “LOCK” or
“OFF” position.
. If buttons “1” and “2” are pressed at
the same time, execution of seat posi-
tion retrieval may not be possible.
. When the retrieved position is the
same as the current seat position, a
chirp will sound twice.
! Utilizing of the seat position
registered with access key fob
s01aa020704
1. Hold the registered access key fob.
2. Unlock the driver’s door by pressing
the “
” button or gripping the door handle.
3. Open the driver’s door.
A chirp sounds and the seat moves to the
registered position.
When the select lever is moved to the “R”
position, the outside mirror will move to the
registered reverse tilt-down position.
NOTE
. If the registered seat position cannot
be retrieved after performing the pre-
vious procedures, try the following
procedures.
(1) Press the “SET” button on the
driver’s door.
(2) Press the “
” button on the
access key fob or touch the door
lock sensor to lock the doors.
(3) Perform the prior procedures
again.
. If the keyless access function is
disabled, the seat position cannot be
retrieved by gripping the driver’s door
handle. However, the seat position can
still be retrieved by pressing the “
”
button on the access key fob. For
information about how to enable/dis-
able the keyless access function, refer
to “Disabling Keyless Access Func-
tion” �P129.
. If a new position is registered for the
same access key fob, the previously
registered seat position is deleted.
. If you are carrying 2 or more access
keys, seat position retrieval may not be
possible.
! Clearing the registered seat posi-
tion with access key fob
s01aa020705
1. Close the driver’s door.
2. While holding the access key fob and
pressing the “SET” button, press the “
”
button on the access key fob.
A chirp will sound, and the registered seat
position will be cleared.
NOTE
After deleting the seat position, wait for
a few moments before registering a
new seat position.
& Head Restraint Adjustment
s01aa04
WARNING
. Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Also, never install
the head restraints backwards.
Doing so will prevent the head
restraints from functioning as
intended. Therefore, when the
– CONTINUED –
Front Seats
37
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...