Loading ...
Loading ...
Loading ...
min.
0.6" (14
mm)
Max. 373/8''
The drain hose can also be connected to a connection nipple on the sink unit's water trap. The
connection nipple must have an internal diameter of at least 1/2''.
The drain hose may be extended by a maximum of 87" (2.2 m) (the total length of the drain hose
must not exceed 177" (4.5 m)). Any joins and connecting pipes must have an internal diameter of
at least 1/2''. However, the drain hose should ideally be replaced with a new hose without joins.
No part of the drain hose may be more than 37 3/8'' above the bottom of the dishwasher.
Attach the drain hose with a hose clamp. Ensure that the drain hose has no kinks.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses.
The supply pipe must be fitted with a water supply valve. The water supply valve must be easily
accessible, so that the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water supply valve and allow the pressure to settle for
a while. Check that all connections are watertight.
40
Installation instructions
Loading ...
Loading ...
Loading ...