Loading ...
Loading ...
Loading ...
NOTE!
Framed cabinets require additional finished filler material behind the face frame for a proper in-
stallation. A minimum 3½” (89 mm) finished return is required on all sides of the opening.
Frameless
cabinetry
Filler
Framed
cabinetry
If the dishwasher is built-in, the surrounding furnishings must be resistant to any condensation from
the dishwasher.
Fit the protective film
Affix the protective film (packed in the document bag). The protective film is to protect the countertop
from moisture.
NOTE!
The surface to which the protective film is fitted must be clean and dry.
Adjust the height and slide the dishwasher into place
1. Start by measuring the height from the floor to the bottom edge of the countertop.
2. Measure the height from the floor to the top edge of the dishwasher.
3. Lean the dishwasher forward a little and adjust the rear foot with the screw at the front of the
dishwasher. Turn clockwise to lower or counterclockwise to raise.
38
Installation instructions
Loading ...
Loading ...
Loading ...