Loading ...
Loading ...
Loading ...
Rinse Agent
To achieve proper drying, always use a liquid rinse agent,
even if your detergent contains a rinse agent or drying
additive.
NOTE: The dishwasher indicates low rinse agent by the
Rinse Agent Indicator Light.
Add liquid rinse agent to the dispenser until the rinse
agent reservoir is full.Wipe up any excess rinse agent that
puddles when the dispenser reservoir is full.
After filling the rinse agent dispenser, the indicator light
will go out in a few minutes after the dishwasher door is
shut.
Refer to the following page for more information on adding
detergent and rinse agent to the dishwasher.
TO OPEN
.................... //
To open the cover, push the button as shown above.
Adding Detergent
Adding Rinse Agent
2 TBS(25 ML)
• Use fresh powdered detergent for best results.
• 1 tablespoon will clean most loads.
• Do not use more than 3 tablespoons. Do not overfill.
• When using detergent tabs, lay them fiat to avoid
contact with the cover.
TO CLOSE
Lift tab to
open
• Always use Rinse Agent even if your detergent con-
tains rinse agent.
• Add rinse agent when the Rinse Agent Indicator Light
on the control panel illuminates.
i
\
1 - Place finger as shown above
2- Slide door forward and press down firmly until you
hear a click.
• To add rinse agent, pour in the oval.
15
Loading ...
Loading ...
Loading ...