Loading ...
Loading ...
Loading ...
AiR CONDITIONER FEATURES
_) MODE select button
O
0 AUTO 0
0 COOL
FAN
0 0
11MER ON TIMER OFF
NOTE:
oTo choose operating mode, press the MODE
button. Each time you press the button, a mode
is selected in a sequence that goes from Auto,
Cool, Dry, Fan The indicator light beside will be
illuminated and remained on once the mode is
selected.
To operate on Auto feature:
• In this mode, the fan speed can not be adjusted,
it starts automatically at a speed according to
the room temperature. If the room does not
get too warm, it will stay at Low speed.
To operate on Fan Only:
• Use this function only when cooling is not
desired, such as for room air circulation.
You can choose any fan speed you prefer.
• During this function, the display will show the
actual room temperature, not the set temper-
ature as in the cooling mode.
Q SLEEP button
O O
% % ,O..oo
.,ooo
NOTE:
In this mode, the selected temperature will
increase(cooling) by 1°C/2°F 30 minutes.
The temperature will then increase(cooling)
by another 1°C/2°F after an additional 30
minutes.
This new temperature will maintain for
7 hours before it returns to the originally
selected temperature.
The Sleep mode program can be cancelled
at any time during operation by again pressing
the SLEEP button,or turning off the unit, or
pressing the MODE or FAN button.This feature
is unavailabe under FAN or DRY mode.
_) LED Display
O O
% % ,O..oo
.,ooo
NOTE:
Shows the set temperature in "_C" or "°F"
and the Auto-timer settings.
Error codes:
El- Room temperature sensor error-
Unplug the unit and plug it back in. If
error repeats, call for service.
E2- Evaporator temperature sensor error-
Unplug the unit and plug it back in. If
error repeats, call for service.
E3= Conenser temperature sensor error-
Unplug the unit and plug it back in. If
error repeats, call for service.
PI= Bottom tray is full- Remove the bottom
drain plug and drain off the water.
Loading ...
Loading ...
Loading ...