Loading ...
Loading ...
Loading ...
CARE AND MAINTENANCE
CARE AND MAINTENANCE
v
Fitter tap
Air fitter
intake grille
Fig .20
3)
4)
1.
IMPORTANT:
1) Be sure to unplug the unit before cleaning or
servicing.
2) Do not use gasoline, thinner or other chemicals to
clean the unit.
Do not wash the unit directly under a tap or using a
hose. It may cause electrical danger.
If the power cord is damaged, it should be repaired
by manufacturer or its agent.
Air filter
Clean the air filter at least once two weeks to
prevent inferior fan operation because of dust.
Removal
Grasp the filter tab, pull the filter'Out" then'up'
Then remove the screw on the side air intake grille,
pull the filter out. See Fig.20.
Cleaninq
Wash the air filter by immersing it gently in warm
water(about 40°C/104°F) with a neutral detergent.
Rinse the filter and dry it in a shady place.
Mountinq
Replace the air filters.
Replacement air filter are available through the
Customer Service.
CAUTION: Never operate the unit without the air
filter in place as this may result in damage to the
unit.
q_
Fig.21
2. Unit enclosure
Use a lint-free cloth soaked with neutral detergent
to clean the unit enclosure. Finished by a dry clean
cloth.
3. Unit idle for a long time
- When you plan to leave this unit unused for a long
time, remove the bottom rubber plug from the back
hole and attach a section of the continuous drain
hose. All the water in the bottom tray would drain
outside through the drain hose.(See Fig.21 )
- Keep the appliance running on FAN mode for half
a day in a warm room to dry the appliance inside
and prevent mold forming.
- Stop the appliance and unplug it, wrapped the cord
and bundle it with the tape. Remove the batteries
from the remote controller.
- Clean the air filter and reinstall it.
- Disconnect the exhaust hose, keep it safety.
Loading ...
Loading ...
Loading ...