Loading ...
Loading ...
Loading ...
INSTALLATIONINSTRUCTIONS
= Level adjustment
i i
_iiiii_i_
i?
_ /_igher
Adjustable feet Adjustable feet
hi"
• Leveling the washing machine properly prevents
excessive noise and vibration,
Install the appliance on a solid and level floor surface,
preferably in a corner of the room
• If the floor is uneven, adjust the adjustable feet as
required (Do not insert pieces of wood, etc., under the
feet )
NOTE: Exfend the feel no more than necessary to level
the washer. The more the feel are exleoded, the
more the washer will vibrale_
*Make sure that all four feet are stable and resting on
the floor and then check that the appliance is perfectly
levet (Use a level)
•After the washer is level, tighten the lock nuts up
against of the base of the washer Al! lock nuts must
be tightened
, tt is critical to adjust the feet pedectly This must be
done while the washer is spinning with a load Use the
wrench (supplied) to adjust the feet until there is no
vibration, Then tighten the lock nuts to prevent further
adjustment.,
NOTE: If there are vibration andnoise (luring the spin
cycle, re-check the leveling of the washer, adjust
the [eel as required, anti tighten the lock nuts
securely to prevent changes in adjustment,
Run the washer with a lesl load to make certain
your washer is properly leveled,, Put
approximately 6 poamts of tanmlrLyin the
machine. Then, press POWER. RINSE+SPIN, and
START!PAUSE, in tha! order. When Ihe machine
spins al high speed, verify that it is slable° If nnl,
adjust tile feel accordingly.
* Diagonal Check
When pushing do_lw the edges of lhe washing machine
top plate diagonally, the machine should nol move up
and down at all. (Please, check both directions.)
If lhe machine rocks n,hcn pushlog the machine top plate
diagonal(€, adjust the feet agaia,
Loading ...
Loading ...
Loading ...