Loading ...
Loading ...
Loading ...
12
ELECTRONIC PROGRAMMER
7KHSURJUDPPHUFDQVHOHFWWKHIROORZLQJIXQFWLRQV
&ORFNVHWE\NH\VDQG
- Minute counter VHWE\NH\
&RRNLQJWLPHVHWE\NH\
(QGRIFRRNLQJVHWE\NH\
- Manual operation mode VHWE\NH\
6HWWLQJWLPHEDFNZDUGVVHWE\NH\
- Setting time forward VHWE\NH\
The digital display (N) always shows the time and
FDQGLVSOD\FRRNLQJDQGHQGRIFRRNLQJWLPHRUWKH
minute counter time by pressing the corresponding
push button.
N.B.: At the end of each setting session (except
for the minute counter) the programmer turns the
oven off. Check when next using the oven, if the
programmer is not going to be used, that the latter
is set on manual operation (see the instructions
given further on).
Setting the time (from 0.01 to 24.00 = hh,mm)
After connecting to the electricity mains or subsequent
WRDSRZHUFXW$872DQG³´ZLOOERWKÀDVK
simultaneously on the display.
3UHVVSXVKEXWWRQVDQGVLPXOWDQHRXVO\DQGVWDUW
VHWWLQJWKHFXUUHQWWLPHE\SUHVVLQJSXVKEXWWRQRU
Once set the AUTO symbol will turn off and
the symbol, for manual operation, will turn on.
Minute counter (from 0.01 to 0.59 = hh,mm)
3UHVVSXVKEXWWRQDQGVHOHFWFRRNLQJWLPHZLWKSXVK
EXWWRQRU7KHV\PEROWXUQVRQ$WWKHHQGRI
the set time the buzzer will go off and the symbol
turns off.
Semi-automatic operation
(with cooking time from 0.01 to 23.59 = hh,mm)
%\SUHVVLQJSXVKEXWWRQDQGVHWWLQJWKHOHQJWKRI
FRRNLQJWLPHZLWKSXVKEXWWRQRUWKH$872DQG
symbols will light up and stay on all the time. At the end
of the set time the symbol will turn off, the AUTO
V\PEROZLOOÀDVKDQGWKHEX]]HUZLOOJRRII
Semi-automatic operation
(with end of cooking time from 0.01 to 23.59 = hh,mm)
%\SUHVVLQJSXVKEXWWRQDQGVHWWLQJWKHHQGRI
FRRNLQJWLPHZLWKSXVKEXWWRQWKH$872DQG
symbols will turn on and stay on all the time. At the end
of the set time the symbol will turn off, the AUTO
V\PEROZLOOÀDVKDQGWKHEX]]HUZLOOJRRII
Automatic operation
(with the start of cooking time delayed)
)LUVWSURJUDPPHFRRNLQJWLPHERWKWKH$872
and symbol will turn on) and then the end of
FRRNLQJWLPHWKHV\PEROZLOOWXUQRIIDVGHVFULEHG
previously. The symbol will turn on again when
EDNLQJLQWKHRYHQVWDUWV$WWKHHQGRIFRRNLQJWLPH
WKHV\PEROZLOOWXUQRIIWKH$872V\PEROZLOOÀDVK
and the buzzer will go off.
Manual operation
Manual operation is only possible when the automatic
SURJUDPPLQJKDV¿QLVKHGRUDIWHUKDYLQJFDQFHOOHGLWE\
SUHVVLQJSXVKEXWWRQ7KH$872V\PEROGLVDSSHDUV
and the symbol turns on.
Buzzer
The buzzer will go off at the end of a programme or at
WKHHQGRIWKHPLQXWHFRXQWHUIXQFWLRQDQGODVWVDERXW
minutes. The buzzer can be stopped by pressing one of
the function push buttons.
Programme start and control
The programme starts after setting. The programme
set can be controlled at any time by pressing the
corresponding push button.
Correcting/cancelling the programme setting
An automatic function programming error will occur if the time
VKRZQRQWKHFORFNLVEHWZHHQWKHFRRNLQJVWDUWWLPHDQG
FRRNLQJHQGWLPH7KLVHUURUZLOOEHVLJQDOOHGLPPHGLDWHO\
E\DEX]]HUDQGWKH$872V\PEROZLOOÀDVK$VHWWLQJHUURU
FDQEHFRUUHFWHGE\DOWHULQJWKHGXUDWLRQRUHQGRIFRRNLQJ
time. Any programme that has been set can be corrected
at any time by pressing the corresponding programming
NH\DQGWKHQNH\RU7RFDQFHODSURJUDPPHFRUUHFW
the time set bringing it to a value of “0.00”. If functioning
time is cancelled the end of functioning is cancelled too
and vice versa. The oven turns off automatically and the
$872V\PEROÀDVKHV3UHVVNH\WRVHWWKHSURJUDPPHU
on manual operation. The right time cannot be corrected
ZKHQWKHDXWRPDWLFRSHUDWLRQSURJUDPPHLVZRUNLQJ
DESCRIPTION OF THE APPLIANCE
Loading ...
Loading ...
Loading ...